View Full Version : OneLapCamaro - Progress
James OLC
06-17-2007, 08:01 PM
We are making headway on the OLC Camaro.
The roll cage is in:
https://static1.pt-content.com/images/pt/2007/06/from20drivers-1.jpg
https://static1.pt-content.com/images/pt/2007/06/from20side-1.jpg
https://static1.pt-content.com/images/pt/2007/06/towards20seat-1.jpg
17673 17674
James OLC
06-17-2007, 08:02 PM
https://static1.pt-content.com/images/pt/2007/06/cage202-1.jpg
https://static1.pt-content.com/images/pt/2007/06/cage203-1.jpg
17675 17676 17677
James OLC
06-17-2007, 08:02 PM
The Tilton Pedal Assembly is in and thanks to the custom steering column that Ididit Inc. built for us, the ATS Lee Engineering power steering box is good to go:
https://static1.pt-content.com/images/pt/2007/06/drivers20high-1.jpg
https://static1.pt-content.com/images/pt/2007/06/tilton20mc202-1.jpg
https://static1.pt-content.com/images/pt/2007/06/tilton20pedals-1.jpg
https://static1.pt-content.com/images/pt/2007/06/pedals201-1.jpg
https://static1.pt-content.com/images/pt/2007/06/pedals202-1.jpg
James OLC
06-17-2007, 08:03 PM
https://static1.pt-content.com/images/pt/2007/06/pedals205-1.jpg
James OLC
06-17-2007, 08:03 PM
And the rest is coming together as well
https://static1.pt-content.com/images/pt/2007/06/june2016201-1.jpg
https://static1.pt-content.com/images/pt/2007/06/june2016202-1.jpg
https://static1.pt-content.com/images/pt/2007/06/june2016203-1.jpg
https://static1.pt-content.com/images/pt/2007/06/june2016204-1.jpg
James OLC
06-17-2007, 08:04 PM
https://static1.pt-content.com/images/pt/2007/06/june2016206-1.jpg
https://static1.pt-content.com/images/pt/2007/06/june2016207-1.jpg
I hope to have the rest of the front end together over the course of the week. We'll mock up the engine and dry sump as soon as the parts arrive and with some luck have the front end together.
Our Stainless tank from Rick's Stainless arrived Friday (thanks Rick :hail: ) and we will get it mounted when we get the car back on a lift. Then we can figure out how we are going to mount the exhaust, rear end cooler, and plumbing for the brakes and traction control. It's kind of busy back there:
https://static1.pt-content.com/images/pt/2007/06/3link201-1.jpg
Mr Nick
06-17-2007, 08:05 PM
Very nice, although I prefer Bud Light.
aussiebj
06-18-2007, 12:22 PM
Nice looks great.......id go with Corona
James OLC
06-25-2007, 08:38 PM
Stealth Tank from Rick's Stainless -
https://static1.pt-content.com/images/pt/2007/06/Ricks202-1.jpg
https://static1.pt-content.com/images/pt/2007/06/ricks206-1.jpg
James OLC
06-25-2007, 08:38 PM
Front suspension is back in place:
https://static1.pt-content.com/images/pt/2007/06/j2920susp201-1.jpg
https://static1.pt-content.com/images/pt/2007/06/j2920susp202-1.jpg
https://static1.pt-content.com/images/pt/2007/06/j2920susp203a-1.jpg
https://static1.pt-content.com/images/pt/2007/06/j2920susp204-1.jpg
Thanks again to Tyler and everybody at ATS! :worship:
James OLC
06-25-2007, 08:39 PM
Finished the day hanging sheetmetal - again:
https://static1.pt-content.com/images/pt/2007/06/drv20low201-1.jpg
https://static1.pt-content.com/images/pt/2007/06/drv20hi201-1.jpg
https://static1.pt-content.com/images/pt/2007/06/pass201-1.jpg
https://static1.pt-content.com/images/pt/2007/06/pass202-1.jpg
https://static1.pt-content.com/images/pt/2007/06/drv20hi202-1.jpg
dodge
06-25-2007, 09:08 PM
looking good
LowBuckX
06-25-2007, 11:34 PM
Looks great but please tell me your flush mounting the exaust coming out the 1/4 panel....... A chrome tip wouldnt look right routed that way.
formula98
06-26-2007, 12:57 PM
Great looking project. keep the posts coming......
andrewb70
06-26-2007, 02:27 PM
Looks great!
Andrew
Mr Nick
06-26-2007, 06:14 PM
Looks awesome!
I'm new to the hard core PT stuff... is that a remote reservoir for the shock?
Powered by vBulletin®