Davezz28
12-23-2004, 10:11 AM
I finally have my rear suspension on my 69 camaro ready to final weld.
The previous owner of the car cut the wheel wells, trunk pan, and center hump between the wheel wells up with a cutting torch to try to tub the car. I have had to replace every thing from the seam behind the rear seat to the rear of the car.
I was going to build a 3 link but was not real confident on the crossmember construction so I fell back on my original plan, a 4 bar patterned after the suspension in the Mule.
Dave
The previous owner of the car cut the wheel wells, trunk pan, and center hump between the wheel wells up with a cutting torch to try to tub the car. I have had to replace every thing from the seam behind the rear seat to the rear of the car.
I was going to build a 3 link but was not real confident on the crossmember construction so I fell back on my original plan, a 4 bar patterned after the suspension in the Mule.
Dave