PDA

View Full Version : E-curve no fire!!!!!!



1981silverz28
06-08-2007, 06:46 PM
I just put in a MSD E-curve in a sbc,I have all 3 wires hooked properly and have no fire out of coil.I have 12 volts in and both grounds hooked up....nothing . I need suggetions:dunno:

1981silverz28
06-11-2007, 04:38 AM
I got it running and it is a very sweet set-up.

paul67
06-11-2007, 08:47 AM
What was the prob ?

justanova
06-11-2007, 12:48 PM
I got it running and it is a very sweet set-up.

WE HAD ONE IN A DIRT MODIFIED AND IT IS AWESOME, BUT WE HAD A PROBLEM WITH THE ROTOR SCREWS COMING LOOSE UNTIL WE LOCTITED THEM, COST US A COUPLE OF RACES, BUT YOU MAY WANT TO KEEP AN EYE ON THAT

1981silverz28
06-12-2007, 04:30 AM
The battery didn't have eniugh juice to spin the motor fast enough to fire the dist.It has to spin at 200 rpm's or so and it wasn't.Optima = fixed !!!!