CliffS
05-22-2007, 11:38 AM
Since all my bearings an cam are shot and rebuilding is taking place right now I'm thinking about bypassing the ignition with cold start in the future. Main goal is priming the engine and get enough fuel in the dumble pumper.
So priming the engine (crancking) for a couple of secs, turning back the key and getting the ignition 'on'. Talking about 400 poncho stroker with MSD billet dis. and 6AL.
Is this an ok idea or will I harm any internal parts?
So priming the engine (crancking) for a couple of secs, turning back the key and getting the ignition 'on'. Talking about 400 poncho stroker with MSD billet dis. and 6AL.
Is this an ok idea or will I harm any internal parts?