Carbon fiber valve covers finally arrived today...

[buickfunnycar.com]

After much confusion...what do you guys think?

https://static1.pt-content.com/images/noimg.gif

https://static1.pt-content.com/images/noimg.gif

https://static1.pt-content.com/images/noimg.gif

https://static1.pt-content.com/images/noimg.gif

[MuscleRodz]

very nice, I will have a set for my LT-1. What was the confusion?

Mike

[buickfunnycar.com]

very nice, I will have a set for my LT-1. What was the confusion?

Mike

Made in CA (should have been drop-shipped to me),sent to an address in Kingston NY where it was intercepted...sent back towards Cali but instead of Salinas,mistakenly sent to San Luis Obipso (one digit off on the zip) then re-intercepted and finally re-directed to me here in Salinas.John from Scooters was most helpful but after awhile,it just became a comedy of errors.He got it straightened out though,they've only been on the truck since 5/7...:eek:

[MuscleRodz]

Made in CA (should have been drop-shipped to me),sent to an address in Kingston NY where it was intercepted...sent back towards Cali but instead of Salinas,mistakenly sent to San Luis Obipso (one digit off on the zip) then re-intercepted and finally re-directed to me here in Salinas.John from Scooters was most helpful but after awhile,it just became a comedy of errors.He got it straightened out though,they've only been on the truck since 5/7...:eek::drive2:

[Yelcamino]

Made in CA (should have been drop-shipped to me),sent to an address in Kingston NY where it was intercepted...sent back towards Cali but instead of Salinas,mistakenly sent to San Luis Obipso (one digit off on the zip) then re-intercepted and finally re-directed to me here in Salinas.John from Scooters was most helpful but after awhile,it just became a comedy of errors.He got it straightened out though,they've only been on the truck since 5/7...:eek:

Those are sweet looking valve covers. Are they available for big blocks?

Don't feel bad about waiting since 5/7. I ordered a stainless gas tank from Rick's Hot Rod Shop back in Feb (I think, it's been so long now I can't remember the exact date). When it arrived 6 weeks later, I opened it to find the side dented in from the caring hands at UPS. :crying:

I sent it back to Rick's for repair (their dime), and they decided to make an all new tank, add in 6 more weeks. There was a mistake and it had to be made a third time. Supposedly it's going to arrive on Thursday. I doubt it, but I'm trying to be hopeful! :fingersx:

So waiting two weeks sucks, but it ain't that bad! :)

[buickfunnycar.com]

Those are sweet looking valve covers. Are they available for big blocks?

Don't feel bad about waiting since 5/7. I ordered a stainless gas tank from Rick's Hot Rod Shop back in Feb (I think, it's been so long now I can't remember the exact date). When it arrived 6 weeks later, I opened it to find the side dented in from the caring hands at UPS. :crying:

I sent it back to Rick's for repair (their dime), and they decided to make an all new tank, add in 6 more weeks. There was a mistake and it had to be made a third time. Supposedly it's going to arrive on Thursday. I doubt it, but I'm trying to be hopeful! :fingersx:

So waiting two weeks sucks, but it ain't that bad! :)

Ouch...sorry to hear that,I'm sure it'll all be worth it in the end though,Rick's makes a nice tank.

www.carbonfibervalvecovers.com and yes,they do make BBC covers

[Neil B]

I think the covers look great, your computer looks like mine, your desk is too clean, and your calender too free. : )

How are you going to baffle them?

[buickfunnycar.com]

I think the covers look great, your computer looks like mine, your desk is too clean, and your calender too free. : )

How are you going to baffle them?

Only part I haven't figured out.I'm running hoses through the fenders into a vented catch can mounted in the drivers front fender.

[Neil B]

Only part I haven't figured out.I'm running hoses through the fenders into a vented catch can mounted in the drivers front fender.

Cool, it sounds like you're doing it road race style which fits with the vibe of the car.

[Kustom_dude]

John,

Who did you get those from they look good. Now if only some one would make a Carbon fiber intake that it would be trick !!!

[buickfunnycar.com]

Cool, it sounds like you're doing it road race style which fits with the vibe of the car.

:twothumbs :6gears:

[buickfunnycar.com]

John,

Who did you get those from they look good. Now if only some one would make a Carbon fiber intake that it would be trick !!!

www.carbonfibervalvecovers.com these were $339/pr shipped.
Last issue of CHP had a piece on a composite intake which looked screaming...but it retails for $850.

[Josh69]

Oooh, those are purty! Looks like they have some Pontiac ones in the works for me!

[buickfunnycar.com]

Oooh, those are purty! Looks like they have some Pontiac ones in the works for me!

Gotta love that....!

[Rick Dorion]

Nice! I live 15 minutes from Kingston. Never knew how close they were :)

[lt1chevelle]

i wish they made them to fit my lt1 motor i had to go with fab ones instead

[NvrDun71]

i wish they made them to fit my lt1 motor i had to go with fab ones instead

There website shows they offer some for LT1's, or centerbolt style heads

[buickfunnycar.com]

There website shows they offer some for LT1's, or centerbolt style heads


You are correct sir!

[pushrod243]

i wish they made them to fit my lt1 motor i had to go with fab ones instead

We do make LT-1 covers thanks for posting the pictures John. I cant wait to see them on your truck. The cover below show both small block styles. I need to update the pics because we no longer put any logos on the cover and they come with a black anodized oil fill cap installed in them now.
https://static1.pt-content.com/images/noimg.gif

[buickfunnycar.com]

We do make LT-1 covers thanks for posting the pictures John. I cant wait to see them on your truck. The cover below show both small block styles. I need to update the pics because we no longer put any logos on the cover and they come with a black anodized oil fill cap installed in them now.
https://static1.pt-content.com/images/noimg.gif

Truck?What you mean truck Willis..?Here's what it's going on again...I'm working to improve performance everyday John,just pulled 431 RWHP...I don't think of it as a truck.:drive:

https://static1.pt-content.com/images/noimg.gif


https://static1.pt-content.com/images/noimg.gif


https://static1.pt-content.com/images/noimg.gif


https://static1.pt-content.com/images/noimg.gif

[pushrod243]

Just had to see if you were awake.

Looks like a fun ride

[buickfunnycar.com]

Just had to see if you were awake.

Looks like a fun ride

Ok...you're excused.:usa:

[lt1chevelle]

ya i know they make them but i need the tall ones but my alt will not clean them thats why i had to get the canton fab ones becuase they have them notched to fit my alt




We do make LT-1 covers thanks for posting the pictures John. I cant wait to see them on your truck. The cover below show both small block styles. I need to update the pics because we no longer put any logos on the cover and they come with a black anodized oil fill cap installed in them now.
https://static1.pt-content.com/images/noimg.gif