PDA

View Full Version : Place to get things Chromed?



68 SuperRam
05-16-2007, 01:23 PM
Looking for a place to get some windshield molding re-finished / chromed, etc. - any recommendations?

69TAPoser
05-16-2007, 01:33 PM
Where in NY are you?

I know a place in Upstate.

Phil

buickfunnycar.com
05-16-2007, 01:35 PM
Sherm's Custom Chroming...but they're in Sacramento,CA

(916) 456-5600

Tom Welch
07-06-2007, 04:57 PM
How about on the East Coast? Any body know of ANY good platers/anodizers out there?

68fusion
07-07-2007, 11:00 AM
Advanced Plating in TN. Ask for Tom Sullivan
High.. but good!

67RSSS502
07-07-2007, 01:06 PM
Paul's Chrome Plating Inc
90 Pattison Streeet
Evans City, PA 16033
800-245-8679
www.paulschrome.com (http://www.paulschrome.com)

Duesey2
07-07-2007, 04:33 PM
Most windshield mouldings are stainless. You can buff them out with some equipment but I don't know any shops that do it. I've talked to Paul's in hershey and they seem like a class act. Excellent quality but I was quoted 675.00 per bumper on a 69' camaro. Wasn't my car and the owner went a cheaper route but you get what you pay for. Bumper boyz are cheaper but the quality isn't the same.

jackreggers
07-08-2007, 06:38 AM
I used these folks to do two 67 Camaro vent window frames (not the vent window chrome itself) last year and was very pleased with the result. The frames that I gave them were badly pitted and corroded and both sides came back in perfect condition. Sorry for the photo quality but there's a thunderstome outside and natural light is at a premium. I came across them at a local car show. They looked at the frames and said "no problem". Very nice people to deal with. High at 300 for the pair but not much different than phone estimates from the other chromers I called. Anyway, they are worth every penny IMO because they look great. I told them I'd pass the word on about their good work if I got the chance, so here it is.

[email protected]

Chrome Wizard
71 Visco Ct
Nashville, TN 37210-2148
Phone: (615) 773-4324