Aerospace Components

[jake72ss]

I recently traded for some chevelle parts, one of which was a rear disk brake setup from aerospace components. I am not familiar with this company or their parts. The calipers are four piston billet calipers with a 1.75" bore, rotors are 11.75 x .81". Here are my Q's

1. what are the pros/cons of this company's products?

2. If I choose to keep this setup, how will I balance the front/rear
braking, due to the aerospace components front calipers having
the same bore as the rear calipers?

I am leary of using this stuff and having to use just an adj. prop. valve. I have had problems in the past with balancing the brakes on my chevelle and do not wish to repeat that again. Thanks for any help.

Jake

[IMPALAMAN1]

Pretty Stuff.

[Steve1968LS2]

Might help to have a link..

http://www.aerospacecomponents.com/home.htm

Just go to products and then brakes.

[Goatman]

I had a set of those on my old GTO race car. They worked well and looked great.

[Steve68]

Most people I know that have them, are happy, they make nice stuff,

[jake72ss]

That's all well and good but I want to know how to balance a system with equal front and rear caliper bores.