OEM swaybars.

[pav8427]

For all you that spend time under alot of different rigs.
I'm looking for a stock style front sway bar with a eye to eye spread of around 43.75" or so.
If it come's off anything that someone may make a performance version of, I'm interested.
If you happen to see something like this could you throw a Stanely at it and pass back some basic dimensions and maybe a application.
Something in the 1.25" range for diameter would be great.

Any help would be greatly appreciated.

Thank you, Doug

[LS6 Tommy]

What chassis is it for? 1 1/4" is an awful big bar. I'm running an 1 1/8" with an iron headed BBC in an 80 Malibu.

Tommy

[MonzaRacer]

My thoughts exactly. I am thinking of installing a 1 1/4 3/4 tone sway bar on my 78C10 with air ride. thats awful big for a car.

[David Pozzi]

FYI first and second gen Camaros are 46.5" but a second gen could be bent inward to fit I'll bet. The arms wing out near the ends. A second gen bar has much longer arms than first gen so is larger, also the third gen F bodies are probably the same and the late 80's IROC and TA have hollow versions!!! :)