Bad94
04-09-2007, 05:43 PM
Ok im putting a Mustang II front suspension on a 49 F100.
Heres the low down, Stock lenght a arms, track width is 2" narrower then factory.
I have the lower a arm level at ride height.
Now on the uppers what do i want those at? I know i want 5* antidive. But do i want them higher on the inside or the outside?
If need pics just ask i have a ton.
Thanks Dan
Heres the low down, Stock lenght a arms, track width is 2" narrower then factory.
I have the lower a arm level at ride height.
Now on the uppers what do i want those at? I know i want 5* antidive. But do i want them higher on the inside or the outside?
If need pics just ask i have a ton.
Thanks Dan