Mr Nick
03-12-2007, 06:00 AM
I got these for to run -6 line to my Q-Jet, they go in the carb body replacing the filter housing.
https://static1.pt-content.com/images/pt/2007/03/rus640221_w-1.jpg
http://store.summitracing.com/partdetail.asp?autofilter=1&part=RUS%2D640221&N=700+4294924496+4294839052+4294849374+4294849373+ 4294906742+115&autoview=sku
But for whatever reason they don't thread in. The threads (pitch?) appears to be the same. I know my Q-Jet has 7/8" threads on it, some are 1" I can get them in only about 1/3 of a turn, then it binds. The factory housing I can thread in almost all the way by hand.
Anybody know what I need?
https://static1.pt-content.com/images/pt/2007/03/rus640221_w-1.jpg
http://store.summitracing.com/partdetail.asp?autofilter=1&part=RUS%2D640221&N=700+4294924496+4294839052+4294849374+4294849373+ 4294906742+115&autoview=sku
But for whatever reason they don't thread in. The threads (pitch?) appears to be the same. I know my Q-Jet has 7/8" threads on it, some are 1" I can get them in only about 1/3 of a turn, then it binds. The factory housing I can thread in almost all the way by hand.
Anybody know what I need?