Post your Garage & Shop pictures!

[MickMc]

Spring is in the air (sunny New Mexico) and I am thinking about building a new garage. Post up your pictures, I need a little inspiration.
I need the inspiration because I looked at 67 SS Chevelle this week end and I really want to buy it. It doesn't need as much work as my 67 (quicker to finish, drive and enjoy) but I really NEED a larger garage not another 67 Chevelle.

Show me those garages pictures....


Mick

[mtuck]

You might want to check out this web site. This will give you a lot of good idea's

http://www.garagejournal.com/

Matthew

[dropit69]

heres mine..its 44 wide 30 deep ...floor drain ,heat ,hot water bathroom..and a game room with a pool talbe and stuff..but need more room already for the daily drivers..lol

[QuasarZ]

Here you go 40'X40' my money pit.

[BonzoHansen]

Mine is only a 25x22 attached. Bigger is better.

80g compressor, fridge, stereo..all the essentials. I had a subbox added. Big help.
The soon to be a powdercoat oven is right there too.
https://static1.pt-content.com/images/noimg.gif (http://img257.imageshack.us/my.php?image=img0231sms1.jpg) https://static1.pt-content.com/images/noimg.gif (http://img341.imageshack.us/my.php?image=img0689sas8.jpg)
Right after I expoxied the floor. Made the garage much brighter.
https://static1.pt-content.com/images/noimg.gif (http://img168.imageshack.us/my.php?image=img3772ny5.jpg)
Small bench in the corner, but I have a large rolling bench that is strong as hell.
That pole is the bain of my existence. :hammer: It mocks me daily.
https://static1.pt-content.com/images/noimg.gif (http://img220.imageshack.us/my.php?image=img3768yj4.jpg)
You can't have enough storage. Rack over bay. A hood is there right now. (see above)
There is a smaller on one the other side I store large cardboard. And the up&low valances for the 77. :) Shelves all over.
https://static1.pt-content.com/images/noimg.gif (http://img157.imageshack.us/my.php?image=img3770ju0.jpg)

[100MPHWHEELSPINNER]

mine... not done yet. 40x60

[dropit69]

100 mph..is that an fbi building?..i am wanting to put one like that up can you pm me what it cost if ya dont mind me asking..thanks..what part of indiana ya from?

[shmoov69]

SWEET!! Your house looks like it will fit INSIDE your garage!
I got a 32x26 detached garage that is too small for what I need. But, if it were a 60x60, it would STILL be too small! LOL!

[MickMc]

BonzoHansen
I dig that Camaro and a frig is the number one item in every garage.
Which epoxy did you use for the floor? Did you have to do the 'acid etch step'?


100mph...Dam that is great looking garage.
If the house next to it was smaller, you would be god like.

Mick

[BonzoHansen]

BonzoHansen
I dig that Camaro and a frig is the number one item in every garage.
Which epoxy did you use for the floor? Did you have to do the 'acid etch step'?


100mph...Dam that is great looking garage.
If the house next to it was smaller, you would be god like.

Mick
u-coat-it. So far I am very happy. I had to clean the crap out of it. lots of muriatic acid. yeah!

[curly]

I built a 24'x32' with a 12'x32' 'bonus' room a few years ago and I am finally finishing the inside of it. My wife and I are doing all the work (she loves to do this kind of thing). We are using bead board and pegboard, I'll try to get some pics posted of the outside and inside.

If I had to do it again (and space would permit), I would have gone with a 30'x40' minimum.

After we get the interior walls finished, I want to epoxy the floor. Any recommendations on brand to use? Also, for those of you who have 'finished' garages, what did you use on the ceiling? I am debating using 4'x8' OSB, painting it white (or some light color to reflect light), and using wood strips on the joints to clean it up a bit.

[TheRev]

some pic's of my dad's garage

[dropit69]

Curly i used osb on my ceiling no strips..and yet to paint it..but did paint my game room white and it soaked up alot of paint guess you dont wanna put rough side out..lol.gonna put more lights up realized i dont have nearly enough..
The Rev damn nice garage can imagine what the house looks like ..wheww

[curly]

Cool! I was hoping someone would say that they had used OSB and it turned out nice. Maybe a good primer would help with soaking up the paint? I might even try to use a white wood stain sprayed on with the wagner power painter. I have thought seriously about painting the panels before hanging them just to save myself the back pain of painting overhead.

We worked ~2 hours tonight and got another wall complete. Hopefully we will have all the walls done this weekend and have 'stuff' hung back up. I have to upload some new pics to photobucket to post.

[dropit69]

..i ran into some problem cause the osb doesnt always measure 8 feet ..some of mine was like 1/8 inch short of being 8 foot so after butting about 6 sheets together i was almost of the joist so gapping might help then either caulk them or strip them..hope this helps,,

[nitronick]

The garage of a drag racer. It's tough to build a car like this in a three car garage.
https://static1.pt-content.com/images/noimg.gif

[MickMc]

Dig that Cash poster in the background.

I gota find me one of those, any idea where I can find a poster like that.

I have a weak spot for drag race Camaros, and yours kind of makes me want a drag car.
Bitchin car, post up some pictures, we love to see craftmanship at work. Show us what you got.


Mick

[CHROMAHOLIC]

Yeh sweet car, and I'll second that where did you get the cash poster?

[69TAPoser]

some pic's of my dad's garage

I so want to build that garage. :drool:

Phil

[curly]

Bitchin car, post up some pictures, we love to see craftmanship at work. Show us what you got.

^^^ I agree, we want to see pics of that drag car:drive: !

This is an early picture of the garage (just after construction was finished). I'll get some new pics this weekend to share.

https://static1.pt-content.com/images/noimg.gif

[BADVELLE]

https://static1.pt-content.com/images/noimg.gif

https://static1.pt-content.com/images/noimg.gif

https://static1.pt-content.com/images/noimg.gif

https://static1.pt-content.com/images/noimg.gif

https://static1.pt-content.com/images/noimg.gif

Here are a few of my shop/garage. I would like to rent some space in an industrial park, I need more room, front, back and up!

[Roger Poirier]

mine... not done yet. 40x60

Let me understand this, the garage looks 10 times bigger than the house. Correct? Your wife must love you.

R.P.

[dropit69]

Nitronick..glad to see you had some time to post ..you still working for Tony?...isnt it race season again..

[Hot Rod]

Here's a few pics my shop/garage behind my house I work on customers car in. I do not have a car at this time.

https://static1.pt-content.com/images/pt/2007/03/large_shop7-1.jpg

https://static1.pt-content.com/images/pt/2007/03/large_shop_d1-1.jpg

https://static1.pt-content.com/images/pt/2007/03/larger_shop_c-1.jpg

More pics >> http://www.interiorsbyshannon.com/shop.htm

Dad's >> http://www.interiorsbyshannon.com/dads_shop.htm

[ProBell]

What I like to call the ultimate DOG HOUSE.

[Hot Rod]

What I like to call the ultimate DOG HOUSE.

You need two! That one is FULL

[ProBell]

I sold the blue El Camino to pay for the Camaro project, and I was just storing the vet for my Dad. It does look cool though. Randy

[MickMc]

Shannon (HotRod)
I've seen your garage pictures before and your dads. I book marked your site for the interior of my 67 Chevelle. I marked your dads site with pure envy. My next house will have a set up like yours but separated from the house like your dads.

Some time in the future we need to talk about interior ideas and prices so I can start saving. I was supposed to have a rendering done by John ??? with some interior ideas, but months have gone by and nothing, maybe you and I could come up with some ideas instead.

Mick Mc

[curly]

HotRod.... awesome work! The '65 Chevelle is what I am drooling over:seizure: (I didn't see any that I didn't drool over but '64-'65 Chevelles are among my favorites).

[vanzuuk1]

Nothing fancy, but its the nicest I have ever had so I love it.



I rent a house so it will have to do for know, now that I am single I will be shopping for a garage with a small house attached to it.

[LMDGUY]

=( Im totally jealous my 2 car garage sucks..

[Bow Tie 67]

I park the 4th gen in the garage also, so its a shuffle everytime I go to work on the 69.


https://static1.pt-content.com/images/pt/2007/03/223230030-1.jpg?1173626418

https://static1.pt-content.com/images/pt/2007/03/223230031-1.jpg?1173626418

[WhiteG240]

https://static1.pt-content.com/images/pt/2007/03/Rims016-1.jpg
https://static1.pt-content.com/images/pt/2007/03/IMG_0009-1.jpg
https://static1.pt-content.com/images/pt/2007/03/Blizzard06005-1.jpg
https://static1.pt-content.com/images/pt/2007/03/NewBird5-1.jpg
https://static1.pt-content.com/images/pt/2006/11/Engine009-1.jpg
https://static1.pt-content.com/images/pt/2006/11/Engine011-1.jpg

Those are all the pictures I have for now. It was supposed to be bigger, but the town said No.:bsjerk:

[eville]

Nothing fancy, but its the nicest I have ever had so I love it.



I rent a house so it will have to do for know, now that I am single I will be shopping for a garage with a small house attached to it.

Is that a Santa Cruz MTB I see there? A Heckler?

[John McIntire]

hey Pro Bell,
what are the dimensions of your shop?
Thanks!

[Restomod]

Inside and out,the Mach will be gone this week so I will have some room to work on the 69.

[65elkyprotour]

Mine is only a 20x22 attached but here are some pics.

https://www.pro-touring.com/forum/vbpgimage.php?do=full&p=826
https://www.pro-touring.com/forum/vbpgimage.php?do=full&p=827
https://static1.pt-content.com/images/pt/2007/03/22589947-1.jpg?1162778911
https://static1.pt-content.com/images/pt/2007/03/22589932-1.jpg?1162778269

[ProBell]

Hi John, My garage is 30' wide and 28' deep. The size works well but if I could I would go 2' wider. That would help when I have to but a car in the left corner.

[Rubes]

I need a bigger one...
but I did sell the dragster and the TransAm you can just barley see on the lift. There is still a '55 chevy bac there too, and a '60 belair off site. The '61 Impala is in the one car attached to the house.

https://static1.pt-content.com/images/noimg.gif

[Hot Rod]

Shannon (HotRod)
I've seen your garage pictures before and your dads. I book marked your site for the interior of my 67 Chevelle. I marked your dads site with pure envy. My next house will have a set up like yours but separated from the house like your dads.

Some time in the future we need to talk about interior ideas and prices so I can start saving. I was supposed to have a rendering done by John ??? with some interior ideas, but months have gone by and nothing, maybe you and I could come up with some ideas instead.

Mick Mc


HotRod.... awesome work! The '65 Chevelle is what I am drooling over:seizure: (I didn't see any that I didn't drool over but '64-'65 Chevelles are among my favorites).

Thanks guys!! I try my best. I hope to have somekind of cheep ride with-in the next year of my own.

I'm working on shay's car now

https://static1.pt-content.com/images/noimg.gif

[John McIntire]

Cool, i was looking to do a 30x30 and your garage looks pretty much what i was thinking about. What are the rest of the measurements? The garage doors, ceiling height? Thats a 2 post lift in there right? Is that a loft above, or is it just attic space?
Thanks again!

[ProBell]

I went to 28' deep because the cost of the Prue engineered trusses went down by a fair amount.I have no columns. The ceiling is 11' tall above the two bays. If you look at the left side you will see the lower section. I have a deck and door that go in the side to a storage room above the garage. The lower section helped the door look normal. The roof is a 12 pitch so it is quite a nice size room. The bay doors are 10' wide by 9' tall. I would recommend the 10' doors. They are nice when backing in the car or sled trailer. Randy

[John McIntire]

Randy, thanks for the info! Looks like your garage is built into a little hill, no. I was thinking of doing the same thing. I have been looking at the "garage kits" from 84 Lumber, but they are just standard height ceilings, so I was going to build up the foundation with a few rows of cinder blocks, possibly 4 feet, and then build the garage on top of that, giving me a 12 foot ceiling height. This way I can fit a lift in one of the bays.
Thanks again for the info!

[Hot Rod]

Mine is 30x50

[MickMc]

White G240
When ever I see an I beam in a garage I get jealous.
No lally columns and lots of space to work without banging into a post.

Mick

[Bill Howell]

Randy, thanks for the info! Looks like your garage is built into a little hill, no. I was thinking of doing the same thing. I have been looking at the "garage kits" from 84 Lumber, but they are just standard height ceilings, so I was going to build up the foundation with a few rows of cinder blocks, possibly 4 feet, and then build the garage on top of that, giving me a 12 foot ceiling height. This way I can fit a lift in one of the bays.
Thanks again for the info!

KIT?
Just buy a kit and exchange the wall 2x4s for 2x6s the 12" length you need for the height you are looking for. Then add enough siding to cover the extra height. If they are using a six inch lap, just multipy the length of all four walls x 2 x extra feet height you are adding.

[vanzuuk1]

Eville, its a vp free. A great bike but I should have gone with something a little lighter.

Rubes , that dragster was cool as hell.

[Boulder69]

Eville, its a vp free. A great bike but I should have gone with something a little lighter.

Rubes , that dragster was cool as hell.

That's why I have a Heckler (28 lbs) and an older Super8. SC bikes are all I have ridden for the last 8 years. I may retire the S8 for the VPFree next year. Forgelines come first!

[John McIntire]

KIT?
Just buy a kit and exchange the wall 2x4s for 2x6s the 12" length you need for the height you are looking for. Then add enough siding to cover the extra height. If they are using a six inch lap, just multipy the length of all four walls x 2 x extra feet height you are adding.

Yeah Bill, they have pre-engineered packages or kits. Friends of mine told me about this when they were looking to build shops. I have yet to stop in and actually talk to someone about this yet, but I will be sure to ask about what you recommend.
Here's a link:
http://www.84lumber.com/projects/garages.asp?type=05&pjt=gar

[WhiteG240]

White G240
When ever I see an I beam in a garage I get jealous.
No lally columns and lots of space to work without banging into a post.

Mick

Yeah it's nice not to have anything to bang into. If you look on the one Ibeam you will see a 2 ton electric hoist. It's been used maybe once or twice :screwy:

It's nice because you can get at least 4 cars in there, if there is bad weather.

The Garage is 26x40. It was supposed to be 30x46 but the town said it was too big.

Anyone want to buy a 2ton electic hoist?:look:

[eville]

Eville, its a vp free. A great bike but I should have gone with something a little lighter.

Rubes , that dragster was cool as hell.

Love my Superlight. Wish I'd waited for the Blur.

[Bill Howell]

Here is one shot of the regular garage and three of my new one. Trouble is the new one is rented out to a race team so the contents are not mine. Pretty cool to have the stuff in it anyway.

[1970cuda]

Bill, if that is you in the picture, that place has to be beyond huge:machine:

[Bill Howell]

16x80

[BuddyP]

It's cluttered now, but this is all I have pics of right at the moment

https://static1.pt-content.com/images/noimg.gif

https://static1.pt-content.com/images/noimg.gif

https://static1.pt-content.com/images/noimg.gif

[MonzaRacer]

I have a steath garage, it cant be seen ,,,not even by radar nor superman ,nobody!
I am a shade tree hot rodder but I dont even have a shade tree.
Lee

[Motown 454]

All beautiful garage's. My car is having new sheet metal hung now, and I don't even have a garage built yet I'm looking into putting it in my front yard off to one side. I was thinking 18X24 could push my luck and go 20X24 but would be tight any thoughts? I know garages are like horsepower never enough. Wayne

[stage2ROUSH]

its not much but here is mine http://i149.photobucket.com/albums/s51/stage2ROUSH_photos/PICT0175.jpg

[MickMc]

Bill
That new garage is super cool, now I am jealous of your car and your garage.
Maybe I need to find an industrial park and build a warehouse, since no one seems be content with the size of their garage. Bigger is better and I can rent the rest.

Mick

[Mark Smith]

my garage is 30 by 30 with 10 ft ceilings.seems to be getting smaller and smaller.I just need to organize it alot better.currently have my 57 belair and my under constuction 69 camaro in there.some day if I ever finish the camaro ill build nice cabinets.for now it works out pretty good.

[protouring70]

O.K. Bill. Where is my Chevelle!? I have got to talk the wife into building another one!

[Bill Howell]

Bill
That new garage is super cool, now I am jealous of your car and your garage.
Maybe I need to find an industrial park and build a warehouse, since no one seems be content with the size of their garage. Bigger is better and I can rent the rest.

Mick

Thanks, yeah that is basically what I did, except I already had the property. Sadly, I have rented too much of it, actually 100% of it, so I am still without a shop. Thats ok though, enough rent money coming in to build yet another one now...hehe

[Steve Chryssos]

https://static1.pt-content.com/images/noimg.gif
Some friends and I share this 24x50 shop. It's just a big ole square, but you can't argue with the contents. :yum: We just added workbenches. The space doubles as Twist Machine's warehouse and R&D shop during normal business hours. This is where final assembly and shipping of your orders occurs. Next up, we'll add a two post lift. If we find more members, we will expand into the shop next door. 48x50 would be pretty cool!! We currently have five cars, but only room for four cars. Good problem to have. Every Tuesday night we all get together and wrench as a car club called The Twisted Idiots.

[Turbo Rob]

Nothing to be proud of, but it keeps the car dry:

https://static1.pt-content.com/images/pt/2007/04/Suspension6-1.jpg

[curly]

https://static1.pt-content.com/images/noimg.gif


Looks like a heck of a stable :worship: !

[shmoov69]

Steve, what's up with the exhaust on the 69?

[69Nova]

Mine. It's a 30x50.

https://static1.pt-content.com/images/pt/2007/04/P1010413-1.jpg

https://static1.pt-content.com/images/pt/2007/04/P1010414-1.jpg

It's filled with more now.

[Steve Chryssos]

Steve, what's up with the exhaust on the 69?

Old school Pro Streeter. Fire it up, back it out, do a coupla burnouts and put it away :lmao:

The owner and I tease each other relentlessly about build styles. :wedgie: But I'm winning. We'll be updating it soon enough. 18's, ATS spindles & box, DSE arms, good brakes, new M/T radials, 4L80E with paddle shifter and good seats. Front tires will be 235's

[shmoov69]

Old school Pro Streeter. Fire it up, back it out, do a coupla burnouts and put it away :lmao:

The owner and I tease each other relentlessly about build styles. :wedgie: But I'm winning. We'll be updating it soon enough. 18's, ATS spindles & box, DSE arms, good brakes, new M/T radials, 4L80E with paddle shifter and good seats. Front tires will be 235's
Didn't know if it was some STS style kit or someting! Kinda' strange looking from the back!

[Steve Chryssos]

Nope. Just some New York City sewer pipe.

[1badchevelle]

Not much but does get do job done.
https://static1.pt-content.com/images/pt/2009/01/Picture002-3.jpg

[Steve1968LS2]

Wow.. a two year old thread back from the dead.. lol

https://static1.pt-content.com/images/noimg.gif

[rogue]

https://static1.pt-content.com/images/pt/2009/01/IMG_2533JPG-1.jpg

[Martin71RS]

you might remember mine....

https://static1.pt-content.com/images/pt/2008/03/december200701-1.jpg

I was now able to buy the one next to it :)
That one will be for storage and a place to work in and put my old Honda XR600R, if I save a bit of money again I will probably have an electric power connection made......that way I can work when it's dark, when it is cold and with the doors closed if needed....

https://static1.pt-content.com/images/pt/2008/07/may200804-1.jpg

[fastback]

A few pics of mine. The wife let me get it all done before she filed for divorce. Nice. Hope the new owner digs it. The one I'm designing for my new house will be even better.

https://static1.pt-content.com/images/noimg.gif

https://static1.pt-content.com/images/noimg.gif

https://static1.pt-content.com/images/noimg.gif

https://static1.pt-content.com/images/noimg.gif

[Irnmike]

https://static1.pt-content.com/images/pt/2009/01/IMG_1655-1.jpg

https://static1.pt-content.com/images/pt/2009/01/IMG_1484-1.jpg

[zman1969]

https://static1.pt-content.com/images/pt/2009/01/P1010394-1.jpg
https://static1.pt-content.com/images/noimg.gif

course that was right after the move now ive added workbench, toolbox, bead blaster, cabinets and a kegerator time to build a detached garage.

[FirstGenZq8]

course that was right after the move now ive added workbench, toolbox, bead blaster, cabinets and a kegerator time to build a detached garage.

are those decals on your floor? how well are they sticking to the floor treatment?

[MickMc]

https://static1.pt-content.com/images/pt/2009/01/IMG_2533JPG-1.jpg

Show us the Lincoln, more pictures please.


Mick

[Throttle]

https://static1.pt-content.com/images/pt/2008/11/2704942864_3f1352023c_b-1.jpg


24x30
This is ofcourse before I put in the driveway, or I could just TurboBoost in there.. :D

[shortrack]

mine......1500 sq ft, 12ft cielings, its 30ft from the house..... will hold my 30ft boat and four cars, got a two post lift a few weeks back. When I decided I wanted to build something like this I looked for a year and at 17 different properties before I found this place with a nice enough house and a lot that would allow me to build this, was out there all day today I love it and I will probably die at this house a happy man!! :) :)
Its really not as dark as it shows in the lift pic, must be the camera settings.

[MZ 500]

The first pics are of my two stall attached to the house which I finished insulating this past fall. The last two are on my 24' x 36' Pole Barn.

https://static1.pt-content.com/images/pt/2009/01/shop001-1.jpg
https://static1.pt-content.com/images/pt/2009/01/shop002-1.jpg
https://static1.pt-content.com/images/pt/2009/01/shop003-1.jpg
https://static1.pt-content.com/images/pt/2009/01/torino6_18_06007-1.jpg
https://static1.pt-content.com/images/pt/2009/01/torino6_18_06006-1.jpg

[caper150]

Heres my 32X40 still have to finish the inside, has infloor heat as well.
https://static1.pt-content.com/images/pt/2008/03/garage0011-1.jpg
https://static1.pt-content.com/images/pt/2009/01/IM000985-1.jpg
https://static1.pt-content.com/images/pt/2009/01/121908007-1.jpg
https://static1.pt-content.com/images/pt/2009/01/framepics002-1.jpg

[wiedemab]

caper150 - care to share some more details on you floor heat. I've considered this options for when I get to build my shop.

I'm also thinking of going Geothermal since we will probably go that route with the house (again, when we build it).

I'm just dreaming at this point, but I like to learn as much as I can from others choices.

Thanks

[BMF Machine]

https://static1.pt-content.com/images/pt/2009/01/IMG_1655-1.jpg

https://static1.pt-content.com/images/pt/2009/01/IMG_1484-1.jpg


I lovE It!

[rogue]

Show us the Lincoln, more pictures please.


Mick

its a bit offtopic for this forum but its my cruiser. the car I'll never sell. its bagged..

https://static1.pt-content.com/images/pt/2009/01/IMG_2303JPG-1.jpg

[Chevrolaine]

My small re-assembly shop
https://static1.pt-content.com/images/pt/2009/01/misc305-1.jpg

and in the background of these pics are my large disassembly shop and storage barns. Inside parking for 17 cars total.:yum:
https://static1.pt-content.com/images/pt/2008/11/DSC00964-1.jpg
https://static1.pt-content.com/images/pt/2009/01/lano025-1.jpg

[caper150]

caper150 - care to share some more details on you floor heat. I've considered this options for when I get to build my shop.

I'm also thinking of going Geothermal since we will probably go that route with the house (again, when we build it).

I'm just dreaming at this point, but I like to learn as much as I can from others choices.

Thanks


I bought my whole set up at Menards, I went in and told them what size it was going to be and they gave me a quote and a material list of everything I needed. As far as putting it in I asked alot of questions and read alot from this site
http://www.garagejournal.com/forum/
go to the heat and ac section and do a search and you'll find alot of info. This is the setup I have.
http://www.nibco.com/cms.do?id=2514
I still have to do the insulation in the ceiling so it's not fully effiecent yet but when I had it on and it was -40 outside it was between 35 and 40 inside.I also have a 80,000BTU construction that I'll turn on and in10 min it's 60-65* then stays there for quite awhile, once the ceiling goes in I won't need to use the heater anymore.

[shortrack]

Guys with in floor heat......arnt you guys afraid of drilling holes in your floor with in floor??......I thought about putting it in when i was building mine, could have done it for price of materials since Im an HVAC contractor.....but the compressor has 4 holes, the lift 16, the furnace stand 4, the drill press another 4.......how did you deal with that???

[pokey64]

Saw this in Wisconsin. My wife actually said "looks like the right garage to house ratio".

[garner67]

What kind of lifting system is this?!

https://static1.pt-content.com/images/pt/2007/03/22589932-1.jpg?1162778269

[protour73]

It's not exotic, but it's functional. Now if I could just kick my wife's DD out of there for good.......

https://static1.pt-content.com/images/noimg.gif

[CruizinKev]

my barn

https://static1.pt-content.com/images/pt/2009/03/DSCF1689-1.jpg

[dadto2jays]

here is the one I use to work on my buckets it is a 12 bay shop at the dealership I run...

https://static1.pt-content.com/images/pt/2009/10/1229-1.jpg
This is in my used reconditioned shop which we have built several cars/trucks...


https://static1.pt-content.com/images/pt/2009/12/stance3-1.jpg


https://static1.pt-content.com/images/noimg.gif



This is my main shop where I have another 18 bays just one block up the road this is where the big $$$$ is made :1st:

[shopking68]

Here is mine. 40x70x12. :)

My buddy had his car in before any of mine were in my own shop!
https://static1.pt-content.com/images/pt/2009/12/DSCN0272-1.jpg

https://static1.pt-content.com/images/noimg.gif
https://static1.pt-content.com/images/noimg.gif

[LeighP]

Some real nice workshops on here.....love the red barn!

Heres mine......40x25 - full upper floor with a barn style roof.

This is when I first put my cars in it -
https://static1.pt-content.com/images/noimg.gif

The second floor -
https://static1.pt-content.com/images/noimg.gif

Started to fill it up a bit -
https://static1.pt-content.com/images/noimg.gif

Theres also a double carport in front with a roller door to seal it off from the street -
https://static1.pt-content.com/images/noimg.gif

I can't really get far enough back to take a pic of the outside....but the garage is way bigger than my house....lol.
https://static1.pt-content.com/images/noimg.gif

[curly]

There are some very nice shops posted but I think the cars are even better! Keep posting them!

[Nine Ball]

I had this 40x60x14 with a 12' overhang built this year. My goal is to be able to do just about anything here at home, instead of relying on the schedule of performance shops. It is a metal building with Hardiplank attached to the exterior. It has two different Rotary lifts, a 2-post 10K and a 4-post 12k.

https://static1.pt-content.com/images/pt/2009/12/shop00-1.jpg

https://static1.pt-content.com/images/pt/2009/12/shop011-1.jpg

https://static1.pt-content.com/images/pt/2009/12/shop13-1.jpg

https://static1.pt-content.com/images/pt/2009/12/shop10-1.jpg

https://static1.pt-content.com/images/pt/2009/12/shop12-1.jpg

https://static1.pt-content.com/images/pt/2009/12/shop11-1.jpg

Tony

[68sixspeed]

Nice Tony!! I'm planning to do a 30x50 or 28x48 in wood next year, but that 40x60 in steel looks good! Giving me something to think about... -Dan

[HotRodKush]

I always wanted a 30x50 too, but that 40x60 is amazing.

[ALLstrokedOUT]

Heres what we used to have to work with, barely a one car garage..
https://static1.pt-content.com/images/pt/2008/07/garagecars2-1.jpg
And heres the 1200sq.ft. shop we got a couple years ago, used to be a huge boat repair shop so theres fiberglass everywhere. You can cram four cars in there; theres a whole lot more crap in there now too..
https://static1.pt-content.com/images/pt/2009/12/DSC00482-1.jpg
https://static1.pt-content.com/images/pt/2009/12/P1010001-1.jpg
https://static1.pt-content.com/images/pt/2009/12/P10100061-1.jpg

[DoABarrelRoll]

it's not exotic, but it's functional. Now if i could just kick my wife's dd out of there for good.......

https://static1.pt-content.com/images/noimg.gif

jenga!

[davenport]

https://static1.pt-content.com/images/pt/2009/12/Photo520-1.jpg

https://static1.pt-content.com/images/pt/2009/12/Photo521-1.jpg


jobs to do:

paint floor
paint walls
throw MORE rubbish out
get a fridge...

[ProTourGSX]

The last two are on my 24' x 36' Pole Barn.

https://static1.pt-content.com/images/pt/2009/01/torino6_18_06007-1.jpg[/COLOR][/FONT]
https://static1.pt-content.com/images/pt/2009/01/torino6_18_06006-1.jpg

Looks like my pole barn, but missing 25 years of accumulated Buick GS cars & parts in it...
Way to keep a clean workspace, and stay organized, bro!:cheers:

[ryeguy2006a]

My wife and I just bought our first house, and it came with this rather large 30x40 insulated and heater ready garage. Also has a 12' enclosed overhang, with covered car port for outside parking. Now the biggest problem with this amount of space is I am now going to have to start filling it up with tools and other parts. This was before we moved in, so it has a few more items, but not much more.

https://static1.pt-content.com/images/pt/2012/09/IMG_20120808_073905-1.jpg

https://static1.pt-content.com/images/pt/2012/09/IMG_20120728_102426-1.jpg

https://static1.pt-content.com/images/pt/2012/09/IMG_20120728_102438-1.jpg

[Billet-Specialties]

https://www.youtube.com/watch?v=9OsKrL9X4Dk