PDA

View Full Version : D/D Help.



Way_Fast_Whitey
02-09-2007, 08:50 PM
I've been thinking about engine combos for a while, but it seems my budget has made up my mind for me.

I was hoping one of you guys could calculate this combo for me and see what we get.

350 block .030
GMPP Vortec heads 64cc 1.94"-1.50" 170 cc runners
10.72 to 1 Hypereutectic's
3.48" stroke
Lunati cam: 233/241 duration @ .050
.504/.525 lift
Edelbrock air gap
Edelbrock AVS 800 cfm carb
Hooker Comp headers
(Haven't decided on rockers yet.)

:twothumbs

Thanks in advance.

Way_Fast_Whitey
02-10-2007, 07:06 PM
Anybody?

HILROD
02-11-2007, 10:04 AM
I tried to run your specs, but it said your cam and carb were way to big. You could run them in a stripped out light car, with more compression and heads, but it'd be super lazy down low. A hight stall converter or a stick would be the only way to go. If the car is heavy, you'll be sadly disapointed.

Way_Fast_Whitey
02-11-2007, 03:38 PM
That's what I was afraid of. How about a 650 carb and this cam.
230 degrees on both intake and exhaust. .480 lift on both.

HILROD
02-11-2007, 04:49 PM
That sound way more do-able. I can do a more acurate program, but it asks for the weight tire size gear ratio etc. With the smaller carb and cam, you'll be way happier.

Way_Fast_Whitey
02-11-2007, 06:27 PM
It's a full weight 68 camaro. 3.73's. I don't know the tire height. 15 inch rally's with 255/60-15's.

Way_Fast_Whitey
02-13-2007, 08:00 PM
anyone else come up with anything?