short steering arms ; camaro

[Motown 454]

http://cgi.ebay.com/ebaymotors/67-68-69-Camaro-Steering-Arms-ss350-z-28-L78-SBC-BBC_W0QQitemZ190077454900QQihZ009QQcategoryZ34200Q QrdZ1QQcmdZViewItem

A while ago someone was looking for some short steering arms for a Camaro. I saw these on E Bay the're not he long ones but not sure if they are mid size or short . hope someone is still looking. not sure if this is right forum. If not sorry I'm still new. Part numbers are 517 518 E Bay number 190077454900 Wayne

[Boulder69]

Auction is BS. Here is the info from "The Man" Pozzi's site:

SHORT 5.25" LH-3954875 RH-3954876 Used on power steer, and Z/28 fast ratio manual.

SHORT LH-3902519 RH-3902520 turn stop pad is more pronounced on top, arm appears a bit thinner than later arms. 1968

SHORT LH-3954879 RH-3954880 (listed in parts book as 5.312" long, this may be the actual correct length for all short arms)

SHORT JL8 four wheel disc arms, 1969 Z/28 Heat Treated, Shot Peened, (probably short 5.3") LH 3916237, RH-3916238

MEDIUM ARM 5.5" length RH-3916266 LH -3916265? not sure what ratio. 67 and into 68 manual steer.

LONG 6" manual, - LH-3902517 RH-3902518 (67, early long measured at 6") LH-3917193 RH-3917194 slow ratio manual steering.

----------

Expect to pay $200-250 for the 875/876. I just did. -eric

[Patrick]

There are a couple of guys on ebay claiming to have short throw steering arms....but their part #s do not match up to Mr. Pozzi's info.

[Motown 454]

I saw those online and just posted it, thats why I put the part numbers down so no one would wastr time if they were the wrong ones. I don't have them for sale just tried to help

[Boulder69]

No worries. Thanks for looking out for us, I was one of the folks looking until recently. Same as you I wanted to help and make sure somebody wasn't duped.

Your sweet #s maching ride probably has the short ones already huh? Be sure and post some photos if you got 'em. -e