PDA

View Full Version : Cyl. heads



blown69nova
12-01-2004, 04:45 AM
Help me pick some alum heads for my 383 sbc
Looking for 195-215 intake runner, 72-76cc chamber and a relatively large exhaust runner.
I would like to get some AFR's but 10-14 weeks out! I'm also looking at Trickflow 23 deg and Canfield's heads.
What do you guys think?
These will be going on a blower motor, Procharger D1sc, hyd roller- 224/236, 575/597 lift, 115+4 cam. Street/ strip pro-tour car!
Any suggestions would be appreciated. Thanks, Steve

gmachinz
12-01-2004, 05:05 AM
I'd go with either the Brodix Track1 heads or World Products Motown heads given your engine combo. -Jabin

dennis68
12-01-2004, 06:36 AM
You can't go wrong with pro-action. Since building a 502 with a pair of used heads the customer found we now have an account with them. All our engines get pro-action heads, which ones depend on how much you want to spend.

ProdigyCustoms
12-02-2004, 09:17 AM
I would go with Pro 1s, no CNC, not required for a blower motor. They are inexpensive (see e bay) and good quality. AFRs would be my first choice for a NA motor, or nitrous motr based on flow, however, Pro 1s, or almost any of the others will flow if ported. Thing is, you do not need to worry about flow, you have a blower!

blown69nova
12-02-2004, 06:57 PM
Thanks for the replies guys. I ended up ordering trickflow 23deg heads from Summit yesterday.