dse pulley ?

[vanzuuk1]

The dse steering pulley has a spec for the gap between pulley and pump, anyone know the measurement? Thanks.

[MrQuick]

I had thought it was so the pulley snout was flush with the pump shaft?

[vanzuuk1]

I spoke to stacy friday and she said there was a specific measurement , she told me she would look for it and I could call back.I forgot to call back and I borrowed the tool to press it on,want to do it this weekend.


I would have thought flush also,????

[Rick Dorion]

Dirk, I had them press on the pulley when I bought their setup. I'll check today and see about a measurement.

[vanzuuk1]

you are the man!

[Rick Dorion]

I measured 1/4" from the face of the pump to the back of the pulley through one of the pulley holes. Also, I measured 3/16" depth in the front from the pully hub to the nose of the shaft inside the pulley center hole if I'm making sense.

[vanzuuk1]

Thanks Rick, have a nice holiday.

[Rick Dorion]

You, too. Hoping to get my motor in!