67 Nova Project

[DocDave]

Tom from OTE just told me about the site so I decide to stop by and say hello as well.

I am currently building a ProTouring 67 Chevy II Sedan out at Tom's shop. Photos of the progress so far can be found at the OTE (http://www.otedesign.com) site or my Project 67duece (http://www.davecool.com/67duece) website.

[6'9"Witha69]

Welcome to the site.

[novanutcase]

Very Cool although I'm wondering if the front suspension is the best choice for road racing being that it is based on M2 technology. Craig Morrison at Art Morrison Enterprises just told me they are developing a C5 front suspension for Chevy2's. You may want to talk to them! Also, check out these sites:

http://www.stevesnovasite.com

http://www.lateral-g.net/

Good Luck!

[DocDave]

Well the front suspension is already installed on the car. If I was to road race the car it would be a more of concern of mine. The setup I chose allowed me the most bang for the buck. Besides OTE has used that same front end on another car and the performance was better than expected. Not to mention anything will be an improvement over the stock front-end with drum brakes, ever try stopping after a 12 sec quarter mile with 4 wheel drum. LOL

[6'9"Witha69]

(snip) ever try stopping after a 12 sec quarter mile with 4 wheel drum. LOLYes. A '66 mustang. It got a conversion real quick after that!