dhardison
11-25-2006, 09:49 PM
Tonight I started tearing down my old 454, mainly to get ready for a rebuild, but also to finally find out what's inside. I'm unable to determine the cam model/brand also whether it's a hydraulic or flat tappet cam. Any help would be appreciated. Some numbers on the cam were:
15 48 - cast markings
CWC I5 - cast markings
3143 - stamped in to rear of cam
Here are some pics of the cam lifters:
http://www.danhardison.com/454teardown/DSC02903.JPG
http://www.danhardison.com/454teardown/DSC02904.JPG
http://www.danhardison.com/454teardown/DSC02921.JPG
http://www.danhardison.com/454teardown/DSC02922.JPG
http://www.danhardison.com/454teardown/DSC02923.JPG
http://www.danhardison.com/454teardown/DSC02924.JPG
http://www.danhardison.com/454teardown/DSC02926.JPG
http://www.danhardison.com/454teardown/DSC02928.JPG
http://www.danhardison.com/454teardown/DSC02934.JPG
http://www.danhardison.com/454teardown/DSC02936.JPG
http://www.danhardison.com/454teardown/DSC02937.JPG
http://www.danhardison.com/454teardown/DSC02938.JPG
http://www.danhardison.com/454teardown/DSC02939.JPG
From all the casting numbers I was able to tell that it's a LS6 block, with 11.25:1 forged pistons and 118cc, rectangular port, open-chamber heads. Some more pics:
http://www.danhardison.com/454teardown/DSC02900.JPG
http://www.danhardison.com/454teardown/DSC02902.JPG
http://www.danhardison.com/454teardown/DSC02905.JPG
http://www.danhardison.com/454teardown/DSC02909.JPG
http://www.danhardison.com/454teardown/DSC02910.JPG
http://www.danhardison.com/454teardown/DSC02911.JPG
http://www.danhardison.com/454teardown/DSC02914.JPG
Thanks,
Dan
15 48 - cast markings
CWC I5 - cast markings
3143 - stamped in to rear of cam
Here are some pics of the cam lifters:
http://www.danhardison.com/454teardown/DSC02903.JPG
http://www.danhardison.com/454teardown/DSC02904.JPG
http://www.danhardison.com/454teardown/DSC02921.JPG
http://www.danhardison.com/454teardown/DSC02922.JPG
http://www.danhardison.com/454teardown/DSC02923.JPG
http://www.danhardison.com/454teardown/DSC02924.JPG
http://www.danhardison.com/454teardown/DSC02926.JPG
http://www.danhardison.com/454teardown/DSC02928.JPG
http://www.danhardison.com/454teardown/DSC02934.JPG
http://www.danhardison.com/454teardown/DSC02936.JPG
http://www.danhardison.com/454teardown/DSC02937.JPG
http://www.danhardison.com/454teardown/DSC02938.JPG
http://www.danhardison.com/454teardown/DSC02939.JPG
From all the casting numbers I was able to tell that it's a LS6 block, with 11.25:1 forged pistons and 118cc, rectangular port, open-chamber heads. Some more pics:
http://www.danhardison.com/454teardown/DSC02900.JPG
http://www.danhardison.com/454teardown/DSC02902.JPG
http://www.danhardison.com/454teardown/DSC02905.JPG
http://www.danhardison.com/454teardown/DSC02909.JPG
http://www.danhardison.com/454teardown/DSC02910.JPG
http://www.danhardison.com/454teardown/DSC02911.JPG
http://www.danhardison.com/454teardown/DSC02914.JPG
Thanks,
Dan