streetk14
11-05-2006, 02:25 PM
Does anyone here have a source for offset sway bar arms?
I want to swap the regular 1" sway bar on my WD C5 subframed '67 with a 1 1/4" 28 spline speedway engineering bar. It looks like the swaybar arms will need to have aprox. 2 1/8" offset to line up with the mounts on the lower control arms.
Speedway Engineering offers 3 1/4" offset arms, but that is too much for my application.
Here is what I'm after, but with less offset.
Andy
I want to swap the regular 1" sway bar on my WD C5 subframed '67 with a 1 1/4" 28 spline speedway engineering bar. It looks like the swaybar arms will need to have aprox. 2 1/8" offset to line up with the mounts on the lower control arms.
Speedway Engineering offers 3 1/4" offset arms, but that is too much for my application.
Here is what I'm after, but with less offset.
Andy