AME full frame

[marty69212]

anyone ever use AME's full frame for 1969 camaro. Whats the install like?

[justanova]

https://www.pro-touring.com/forum/showthread.php?t=22778

[Porterbuilt]

We are currently installing one in a 69 camaro. We removed the stock floor, firewall, and trunk. It is A LOT of work. One could salvage some of the firewall and stock floors and trunk if desired, but we opted to remove it all for a cleaner job. The top of the frame rails sit about an inch or two lower than the door sills. We are going with a 4.5" ride height.

Here's a couple pics of the car and a Kris Horton rendering. I will be adding this to the "project" forum in the near future.

[justanova]

We are currently installing one in a 69 camaro. We removed the stock floor, firewall, and trunk. It is A LOT of work. One could salvage some of the firewall and stock floors and trunk if desired, but we opted to remove it all for a cleaner job. The top of the frame rails sit about an inch or two lower than the door sills. We are going with a 4.5" ride height.

Here's a couple pics of the car and a Kris Horton rendering. I will be adding this to the "project" forum in the near future.


I notice you are in mesa, would it be possible to come by and have a closer look at you project sometime? looks killer by the way.

[Porterbuilt]

Of course, just give me a call so we can make an appointment. You can find my contact info. at www.porterbuiltstreetrods.com