Recommendation for minitubbing and fab work in Seattle area?

[davepl]

This winter I'd like to get my '69 RS/SS 396 minitubbed, a 5-point bar, and subframe connectors welded in.

My first choice would be Wayne Due, since he's well regarded and local, but he's closed his shop.

Is anyone else in the general area that has had similar work done and could offer a recommendation for shop or fabricator?

Thanks!
Dave Plummer
Redmond, WA

[jerome]

art morrison is in the area, not sure if they do the kind of work youre looking for, but they are highly regarded in the area of chassis fab.

Jerome
Tacoma, WA

[novanutcase]

Dave!

Jesse Lombard 425-737-4089

He was Wayne's main fabricator and has opened his own shop. Tell him John from L.A. sent ya!

John(from L.A.!):rotfl:

[davepl]

Thanks for the lead on Jesse, I will give him a call.

When I spoke to Art Morrison, they said they build components but don't do any work/fab on cars.

[sharp67]

I just had some work done by Ron Piercy in fife. He did a six point roll bar, integral frame conectors, relocated the rear shock locations and put in a driveshaft loop. From what I can tell he does good work. We did all mine in chromolly, his welds were good, tigged the roll bar work, nice beads. Ill see if I can find His number.13387

13388

13389

13390

[wendell]

The second third and fourth pictures don't look TIG'ed.

[TLWiltman]

Check this out.
extrememetalandpaint.com (http://extrememetalandpaint.com)
They're in Anacortes, and are building/built one of the cars going to the SEMA show

[kennyd]

The second third and fourth pictures don't look TIG'ed.

2nd that

[sharp67]

the main welds on the hoop to the rear kickers, the cross bar, harness tabs, and down tube from cross bar are all tigged, the rest which tie into the body i believe are all mig. Here are a few pictures that I think are better representing the work13396

13397

[sharp67]

13398

13399

13400

13401

its pretty hard to get a good picture of the welds , but here are a few more. the # for him is 253-815-0652 or cell 206-713-5954