PDA

View Full Version : Converter on 385 Fastburn



TheRoaringEagle
10-14-2006, 11:29 AM
What would be a good torque coverter/stall speed for my setup?

stock fastburn 385 from GMPP, turbo 350, and 3.42 in the rear.

"Camshafts are hydraulic roller and rated at .474 in. intake lift, .510 in. exhaust lift with duration at .050 in. being 208 for intake and 221 for exhaust."

Steve Chryssos
10-16-2006, 10:53 AM
One thing for sure: Don't get carried away! Unless this is a very light vehicle, stick with a 2000 to 2200 rpm stall converter.

SYDEWAYZ71
10-16-2006, 12:55 PM
recomendation : hughes 2500
I was running the same diff ratio & 26" tall tires.. ran fine