Oil pan options?

[sharp67]

Im building a small block chevy engine and I am looking for a good quality road race type pan. Its 350 with 2 piece rear main. I would like something with a screen, scraper and trap doors. Its gooing in a 1967 Camaro with a stock front subframe. Its a 3.75 stroke. Anybody have good experience with any particular pans? any recomendations would be greatly appreciated. Thanks. Jay.

[Damn True]

Tough to beat Canton for that application.

[Lowend]

Agreed
Moroso would be next in line after Canton

[CarlC]

CV Products LT1080RR

[sharp67]

WHATS YOUR ENGINE COMBO LIKE. IM CURIOUS IF MY BUILD WILL HIT THE 500/500 MARK. Did you have your engine dyno tested or is it a estimation. Im in the process of building mine. Ive got the scat forged superlight 3.75 stroke crank, 5.7 q lite rods, srp flat top pistons. Im running a zero deck, the new afr 195 heads, 1.52 pro mag rockers, pro mag roller lifters, and a 510/520 / 230/236 / 110

[sharp67]

I went to cv products web site and put in part # lt1080rr but it gave me no matches. I see cv products carries a lot of different vendors. Is it a cv oil pan or something else?

[Samckitt]

CV oil pans are made by Champ Pans. Mine came from CV with Champ stickers, it is cheaper from CV.