PDA

View Full Version : Ram Jet 502 vib.



oneton1949
11-11-2004, 06:07 PM
undefinedundefinedundefined I have a crate ram jet 502, I installed a flex plate from a 454 is this the right one for this eng. or do I need one for a 502 :fingersx:

dhardison
11-12-2004, 07:16 AM
A flexplate for a TWO-piece rear main seal 454 (i.e. Gen IV block) will NOT work on your 502. You need a flexplate for a Gen V/VI with a ONE-piece rear main seal. I'm not sure of the technical differences, but I always see Gen V/VI blocks listed as a different part number for flexplates and flywheels. This Jeg's link is a good example of that.

http://www.jegs.com/cgi-bin/ncommerce3/ProductDisplay?prrfnbr=45247&prmenbr=361

HTH,
Dan