PDA

View Full Version : Who wants SBC turbo manifolds?



DC454
09-24-2006, 08:20 PM
I testing the waters to see how much interest there is for some turbo manifolds for small bock Chevy's. If there is enough interest, I might start production. The manifolds would be set up with T-4 flange and 35/38mm wastegate. The manifolds would be made out of 304 stainless steel with 321 stainless collectors. I'm still working out the price but it's going to be alot more afforable than some of the others I've seen. Let me know if anyone's interested.

GBodyGMachine
09-25-2006, 01:24 PM
I would be interested. In relation to the engine, where would the turbo(s) mount?

Jeff

DC454
09-25-2006, 08:06 PM
The turbos would be located at the front of the engine. It's looking like I'll be making a set for a 68 Camaro in the next couple of weeks. I'll post some pics as soon as I do and will have a more solid price. I may offer it as a complete depending on the response I get.

GBodyGMachine
09-26-2006, 03:08 AM
What about us without 1st Gen F-Body's?
Jeff

4OfaKind
09-29-2006, 02:16 PM
I would be interested.
Would the compressor inlet point toward the radiator or the fender? I would prefer the radiator .

Mal

DC454
09-29-2006, 07:44 PM
I'm going to make the inlet's facing toward the fenders. I'm going to try to minimze the amount of bends close to the collectors due to the stress they cause as the expand when the heat up. Most of the turbo manifolds I've repaired made out of stainless crack at the collect. The manifolds are going to be close to the motor for a tight fit so they should fit mutiple apps. For those willing to do a little fab, they could buy the manifolds, turbos, wastegates, and misc parts from me and build their own kit. This will keep the price down.

4RS FED
10-06-2006, 07:15 AM
are they going to look like this??


https://static1.pt-content.com/images/noimg.gif

4RS FED
10-06-2006, 07:16 AM
https://static1.pt-content.com/images/noimg.gif

https://static1.pt-content.com/images/noimg.gif

DC454
10-06-2006, 05:39 PM
Same basic design. Nice work, clean and simple.

Paul69camaro
10-07-2006, 09:25 AM
I may be interested, let me know when you get everything worked out.

67camarokid97
11-24-2006, 09:56 AM
ide be interested also. will these fit SBCs and LT1s? or Just SBC's? either way im still interested