PDA

View Full Version : new camaro seats in first gen with minitub



ProTouringRS
11-08-2004, 09:29 PM
what year leather seats fit in 68 camaros best what kind of seat brackets will I have to make or will they bolt on the stock mount? What about backs are they any skinnier than the stock seat because I have mini tubbed to the leaf springs which is about 2.5 inches in the back? any other seat thoughts?
THANKS

baz67
11-08-2004, 11:04 PM
Shoot camaroboy69 a PM, I beleive he did just what you want to.
Brian

Tom Welch
11-10-2004, 06:22 PM
They will fit with some seat bracket mods for correct seat angles and the rear brackets will need to be cut and repositioned then welded back on. A relatively simple job.

CAMAROBOY69
11-11-2004, 07:50 AM
The 4th gen seats were very easy to install. Almost direct bolt up in the front.
The back is definetly a lot more skinny than the original seats. I could measure for you but I would say at least 5" smaller on each end. Sounds like it would fit real well with a mini tub.
If you have more questions I can give more detail. This is a very old pic.
https://static1.pt-content.com/images/noimg.gif