PDA

View Full Version : LS364 Ignition problems!



Paco1112
09-01-2006, 01:56 PM
I already have a thread in the LS forum realizing that I may have put it in the wrong discussion. Anyways here is my original question.

I just purchased the new GM grate motor LS364. This is brand new for this year and is of the LS family. It is designed for pre-1977 vehicles. Basically it is a IV Generation LS2 that is carbeurated. I am installing the motor in a 1967 camaro and I am now running into ignition system problems. GM recommended an after market ignition system that was compatable with a 58X reluctor wheel and the new cam sensing. Of course they did not provide any resources. If anybody has any suggestions or helpful hints it would be greatly appreciated.
I have already spoke with MSD and they do not have anything available yet for Gen IV, only equipment for Gen III.

TD509EFI
09-14-2006, 03:13 PM
If you can't find a controller that works with the 58X reluctor whell, why not use the distributor adapter, part# 88958679 and stick in a distributor of your choice?

John

ron79
11-05-2006, 06:49 AM
msd just came out with a controler for 58x look at the msd web site