New LS364 ignition system problems!

[Paco1112]

I just purchased the new GM grate motor LS364. This is brand new for this year and is of the LS family. It is designed for pre-1977 vehicles. Basically it is a IV Generation LS2 that is carbeurated. I am installing the motor in a 1967 camaro and I am now running into ignition system problems. GM recommended an after market ignition system that was compatable with a 58X reluctor wheel and the new cam sensing. Of course they did not provide any resources. If anybody has any suggestions or helpful hints it would be greatly appreciated.
:banghead:

[baz67]

Have you checked out ls1tech.com?

[TA219]

I beleive that is the same motor that was used on "project blue hair" on musclecar. I cannot remember the details about ignition but it may give you a place to research
http://www.truckstv.com/sites/musclecar/episodes/MC.php?ep_num=MC2006-19&ep_m=July

[ron79]

call up msd , they make control unit for the lsx motors

[Paco1112]

I tried MSD. But Unfortunately they have not made a module for the 58X reluctor wheel. They have equipment for the Gen III but nothing for Gen IV.
I have also posted a thread on ls1tech.com. No luck yet.
"project blue hair" looks as if it will be my best bet. I am still waiting for a response.

[andrewb70]

Leave it up to GM to offer an engine without having a solution for spark control. As far as I know, nothing is offered for the 58 tooth wheel. I am curious what "project blue hair" is using.

Andrew

[gEtyOpAPiOn]

from what i know people use the ls1 style reluctor

[gEtyOpAPiOn]

you probably have an 2006 ls2 crankshaft i think the 05 still had the older style reluctor