2nd gen bmr control arms

[SICMARO]

has anyone installed or ordered these arms? the upper cross shaft bolt hole are not drilled correctly. they need to be about 14/16 of an inch further apart. the lower arms dont want to fit into the frame pockets. they also seem to be to narrow. any thoughts would help. i will be calling bmr in the am! its a 72 camaro. tia!

[Lowend]

BMR has QC problems... never...

[rocketman]

If you have a problem call BMR,they will take of it,I have used all there 4th gen stuff and never had a problem.

[ks71z28]

Hey when are us Nor Cal 2nd gen guys going to get together? I have the carbon fiber truck lid project completed, like to show it off. Sacramento would be a good meeting place. I'm up in Chico.

Keith

[MrQuick]

we were wondering what happened to you...both of you. any shows coming up?


BMR would only know, must have slipped past the inspector??

[SICMARO]

well i got the lowers to fit, with a lil work! i called bmr this morning and it sounds like thay installed the wrong cross shaft. so they are over nighting them to me and say i should have them saturday morning. so we will see!


As soon as the cars done im up for a nor-cal meet!

[Lowend]

I'd be happy to do a Nor Cal meet... But I'm not gonna have a free weekend until the end of Sept.
Perhaps we could do a run to Roaing Camp in Scotts Valley or somthing?

[SICMARO]

Update!!
https://static1.pt-content.com/images/pt/2006/08/HPIM1601-1.jpg
https://static1.pt-content.com/images/pt/2006/08/HPIM1591-1.jpg