1992 Mustang Coupe

[3rdgeneration]

Hello,
I am new to this website, but thought I would contribute with my project. It is a 1992 Mustang LX Coupe. I will be updating this thread as progress continues.

[3rdgeneration]

Engine Pic:

[3rdgeneration]

Before the engine came out:

[3rdgeneration]

I would like to say that the car has had different phases of development, but I seem to be the type of guy that goes at things all at once.
Engine and Engine related:
The engine compartment had all the holes welded and the panels smoothed to make the engine compartment a little cleaner. All of the wiring is redirected behind the inner fenders for cosmetic reasons.

[3rdgeneration]

I would like to say that the car has had different phases of development, but I seem to be the type of guy that goes at things all at once.
Engine and Engine related:
The engine compartment had all the holes welded and the panels smoothed to make the engine compartment a little cleaner. All of the wiring is redirected behind the inner fenders for cosmetic reasons.
The engine consists of a 1968 Boss 302 Block opened up to a 347 cubic inch. It attaches JE pistons with Cunningham rods to an SVO crank, all tightened down with ARP bolts. The heads are TFS street heat heads. Exhaust exits through Hooker headers. There is more but you get the idea.
Drivetrain is kept simple with a Tremec.
Suspension:
Bilstein struts and shocks with Maximum Motorsports coilovers up front. Cobra brake kit in the front.

[3rdgeneration]

Sorry about the duplicate posts!

[wiedemab]

I like it! I'm kind of partial to these cars. Looking forward to seeing your progress!

Brandon

[3rdgeneration]

Engine as it was going in!