question for Mark Stielow

[lt1chevelle]

i was woundering on the red 64 chevelle what suspension were u running and how low did u lower the car in the front and back thanks

chris

[zbugger]

As far as I remember, it is using all Hotchkis components. I think you might be able to find more info on www.popularhotrodding.com as the car was built in it's pages.

[lt1chevelle]

As far as I remember, it is using all Hotchkis components. I think you might be able to find more info on www.popularhotrodding.com (http://www.popularhotrodding.com) as the car was built in it's pages.

i have already look at that but dose not say how much he lowered it just says he used hotchkis components

[ProdigyCustoms]

Jody owns it now, ask him. PM camcojb

[lt1chevelle]

Jody owns it now, ask him. PM camcojb

i did he gave me the spring number off the front but i can seem to find what spring it is. and he dose not know how much is was lowered in the back

chris

[jeffandre]

Ask Jody how far the fender lips/edges are from the ground, front and rear, which will give you an idea of how much you need to do to get the same ride height.

[lt1chevelle]

Ask Jody how far the fender lips/edges are from the ground, front and rear, which will give you an idea of how much you need to do to get the same ride height.

alredy did that i was just woundering the exact hight and what he used (ex:drop spindles and springs or just springs)

but thanks everyone for the help

[camcojb]

Ask Jody how far the fender lips/edges are from the ground, front and rear, which will give you an idea of how much you need to do to get the same ride height.

Gave him the heights, front spring numbers, and that Mark used a B-car spindle conversion. That with a small block/aluminum heads should get him the same up front.

On the rear I cannot see a part number on the springs, although Hotchkis may know. :dunno:

Jody

[zbugger]

I don't know why I'm thinking its the 2" drop springs. I have to dig up the articles again.

[camcojb]

I don't know why I'm thinking its the 2" drop springs. I have to dig up the articles again.

I gave him the front part numbers, so calling Hotchkis would confirm what they are. The rears they may remember, or if you can find his article. The one thing I reminded him was that the taller B car spindle makes a height change in itself I believe.

Jody

[lt1chevelle]

i want to thank every one who has gave me some info i aprieciate(sp?) it, and sorry if iam bugging you jody. ill just have to find someone with a b body spindle and have them see what the hight is and commpare it to my spindle.
thanks again