72.RS/SS
07-17-2006, 11:44 AM
We are building a 68 Camaro. So far this is what we have:
2" drop spindles
DSE 3" drop rear springs
Alston SFC's
solid body bushings with 1/2" body drop
DSE mini tub
18" wheels in front and 20" in the rear
We plan to get tubular upper control arms and use the stock lowers. We would like a 3" drop in the front too. We want the car to set low and almost level. What springs have any of you had success with. Should we go the coil over route. Thanks for your help.
2" drop spindles
DSE 3" drop rear springs
Alston SFC's
solid body bushings with 1/2" body drop
DSE mini tub
18" wheels in front and 20" in the rear
We plan to get tubular upper control arms and use the stock lowers. We would like a 3" drop in the front too. We want the car to set low and almost level. What springs have any of you had success with. Should we go the coil over route. Thanks for your help.