73z-6sp
07-10-2006, 01:26 PM
Hi Everyone. I am having an issue with my fan/controller. It seems to always be on. Even if the car is off. I used the painless wiring harness for the car and used the fan control wire (gray wire from Painless harness) for the ignition on connection. I even pulled the fuse for the electric fan and it still pulls juice. So I disconnected it from the dc control, same thing. Whats going on here? The controller should not be supplying voltage to the fan if the car isnt running and especially if the "ignition on" signal is disconnected. Any ideas?