Robert K
07-02-2006, 11:59 PM
I would like to say hello to everyone. This is my first post, but have been here for about 2 years. Thank you to all for the info needed to start my pt project.Pics to follow, just as soon as the wife downloads here project pics off of the camera. OK on to the car.
1973 nova
Engine: .030 over 350, KB hyper ft pistons,stock rods, world product s/r heads,weind intake, 600 holley(installed) new weind x-cellerator, 650 dp holley(to be installed) comp cams 280h, unilite converted stock dist. summit headers, 2 1/2 in exhaust with flowmasters.
Trans: for now th350 with 2100 converter and shift kit. Realy want to convert to 4 or 5 speed when I can afford it.
rear:10 bolt 3.08:1 ,want 9 in with 3.89 ?or something in the neighborhood.
brakes: ccp master/ prop valve, stock disc/ drum, not sure of direction I will go here. for sure will be disc/ disc.
suspension: front, complete rebuild with pst poly kit. new moog 6308 springs 380 lbs( thanks David Possi for the info on your site) edelbrock tie rod tubes, 1.250 suspension techniques sway bar, kyb shocks,
rear: poly bushings, stock springs, kyb shocks.
wheels/ tires: 15 x 7 s-10/ camaro wheels with 265/50/15 all the way around
Still alot to do, but since my daily driver died I am now forced to drive the nova again, so progress has slowed down drasticly.
once again hi all,
Rob
1973 nova
Engine: .030 over 350, KB hyper ft pistons,stock rods, world product s/r heads,weind intake, 600 holley(installed) new weind x-cellerator, 650 dp holley(to be installed) comp cams 280h, unilite converted stock dist. summit headers, 2 1/2 in exhaust with flowmasters.
Trans: for now th350 with 2100 converter and shift kit. Realy want to convert to 4 or 5 speed when I can afford it.
rear:10 bolt 3.08:1 ,want 9 in with 3.89 ?or something in the neighborhood.
brakes: ccp master/ prop valve, stock disc/ drum, not sure of direction I will go here. for sure will be disc/ disc.
suspension: front, complete rebuild with pst poly kit. new moog 6308 springs 380 lbs( thanks David Possi for the info on your site) edelbrock tie rod tubes, 1.250 suspension techniques sway bar, kyb shocks,
rear: poly bushings, stock springs, kyb shocks.
wheels/ tires: 15 x 7 s-10/ camaro wheels with 265/50/15 all the way around
Still alot to do, but since my daily driver died I am now forced to drive the nova again, so progress has slowed down drasticly.
once again hi all,
Rob