Marcus SC&C
10-22-2004, 06:46 PM
We`ve been looking into offering a new line of adj. tubular upper suspension arms for Mopar A,B,and E body cars. They would be steel, gold irridite plated with dual knurled adjustment sleeves just like the cataloged versions we sell made by Pole Position Racing and would be made largely from PPR components. Bushings would be high durometer/low deflection rubber and they would accept Chry. screw in style ball joints. These arms would allow much more alignment adjustment than is normally possible with the factory adjustment method. They`d be great for lowered cars or track days.
A Street Comp Stage 1 package would also be offered. This would include the adj. tubular arms and a set of modular tall stud ball joints which will raise the roll center height and improve the camber curves. Think of the effect as the Mopar equivalent to the Guldstrand mod for early Camaros or the Shelby mod for `64-`65 Mustangs. The prototypes have been built and fitted and the geometry worked out both by computer and on test vehicles. We`re trying to decide if there`ll be enough interest to merit putting them into production. If anyone`s interested drop me a line at [email protected] or post here. Thanks! Marcus
A Street Comp Stage 1 package would also be offered. This would include the adj. tubular arms and a set of modular tall stud ball joints which will raise the roll center height and improve the camber curves. Think of the effect as the Mopar equivalent to the Guldstrand mod for early Camaros or the Shelby mod for `64-`65 Mustangs. The prototypes have been built and fitted and the geometry worked out both by computer and on test vehicles. We`re trying to decide if there`ll be enough interest to merit putting them into production. If anyone`s interested drop me a line at [email protected] or post here. Thanks! Marcus