lftnwhls
05-21-2006, 06:24 AM
540 cubic inches of Chevy power.
A small list of components.
Dart big M block
Dart Pro 1 Heads 325 cfm intake port.
eagle 4340 crank
Eagle H beam rods
SRP 10:1 pistons
4.5 inch bore 4.25 inch stroke
Hydrualic roller cam
moroso pan
Victor intake 950HP carb.
It will be an all pump gas motor with approx 700-750Hp. I wanted something that ran smooth but had lots of power and doesn't overheat. The low compression ,aluminum heads and hydraulic roller cam should make it reliable.
This motor is offered at Shafiroff but I had someone here in Canada Build it for me the shop is called Rolling Thunderz and they specialize in Drag race motors for 6,7,8 second cars as well Viper performance. www.rollingthunderz.com (http://www.rollingthunderz.com/)
A small list of components.
Dart big M block
Dart Pro 1 Heads 325 cfm intake port.
eagle 4340 crank
Eagle H beam rods
SRP 10:1 pistons
4.5 inch bore 4.25 inch stroke
Hydrualic roller cam
moroso pan
Victor intake 950HP carb.
It will be an all pump gas motor with approx 700-750Hp. I wanted something that ran smooth but had lots of power and doesn't overheat. The low compression ,aluminum heads and hydraulic roller cam should make it reliable.
This motor is offered at Shafiroff but I had someone here in Canada Build it for me the shop is called Rolling Thunderz and they specialize in Drag race motors for 6,7,8 second cars as well Viper performance. www.rollingthunderz.com (http://www.rollingthunderz.com/)