PDA

View Full Version : ac fitting availability



lil zl1
05-20-2006, 11:33 AM
I am using the sanden ac compressor provided in the march serpentine kit which has #8 male fitting on the hard line. I have a billet specialties bulkhead that has #6 male fitting. what fitting has to be used to adapt the #8 to the #6 using #6 line? Thanks for the help.

KUL FIR CHICK N
05-20-2006, 02:30 PM
You should have a #8 and #10 on the compressor and a #6 and #10 on the firewall. The #8 goes to the top fitting on the condenser, the #6 on the bottom of the condenser runs to the #6 on the firewall, and the two #10's connect.