Tim_in_NC
05-12-2006, 04:45 AM
Hey Guys,
Just wanted to ask this to see if this is the norm or if there are better ways to zip off a blower pulley...
I'm thinking of just using a high quality strap wrench to hold the pulley in place while I back the pulley bolt off with an air impact wrench ...
This is for a D1SC...
Another thing... Is it just me or does Procharger send these units out with a SUPER TIGHT oil check dipstick... Heavens sake ... I've never seen a Flat Head Screw on that TIGHT!!!
Just wanted to ask this to see if this is the norm or if there are better ways to zip off a blower pulley...
I'm thinking of just using a high quality strap wrench to hold the pulley in place while I back the pulley bolt off with an air impact wrench ...
This is for a D1SC...
Another thing... Is it just me or does Procharger send these units out with a SUPER TIGHT oil check dipstick... Heavens sake ... I've never seen a Flat Head Screw on that TIGHT!!!