can you guys tell me anything about my engine?

[Mr.VENGEANCE]

i tried to do a little searching on this engine to not much avail

id like to know alittle about it.. like its probable hp or is it a popular swap. things of that nature.

but hell to me its damn fast.. :D

406 cubic inch SB chevrolet. This engine is 6.6
The engine block was fully reconditioned (bored .030" over in
the process),
increasing displacement to 406 cubic inches.
Edelbrock Performer RPM aluminum heads (64cc straight plug
chambers)
Edelbrock Performer RPM aluminum intake manifold
Lunati cast crank and pistons assembled for 10:00-1 compression
Lunati "number 10" 292/
292, Lift
.480/ .480
Holley 750 vacuum advance carburetor
GM HEI distributor
The transmission is a TH350 3 speed automatic.

thanks yall!

[camcojb]

I'd guess about 425 HP or so, maybe a bit more.

Jody

[Lowend]

I'll say probably in the low 400HP range. That cam is pretty dated, you could find a lot more power with a more modern grind

[Mr.VENGEANCE]

are you guys serious?!.. damn i thought it was like 300+ or something lower like that.

btw heres a photo of the engine.

https://static1.pt-content.com/images/noimg.gif

wow guys thats great to know!

hopefully i can take it to a dyno and see the exact number.

[Lowend]

Oh it could be making in the 300's. Those numbers are assuming that everything is in good working order and there is a good tune on the engine

[Mr.VENGEANCE]

oh i see what youre saying

but thanks for the round about idea tho!