Anyone know about 351 Clevelands?

[grand_marquis_gt]

the fine (ha!) folks on corral managed to anger me when I asked about a cam, so I figured i'd ask here.

Anyone know of a good cam for my 1970 351C-4V? It will have 11:1 compression, and i'm looking for a usable rpm of about 2800-7K rpm....

Yes, I know, thats a lot for a street car, but I ain't too worried.

[Lowend]

Well.... I think we probably outta talk about your combo a little more...
What gears are you running, Iron or Aluminum heads, what intake manifold...
Is this a street car?
What are your ulitmate goals?

[fast Ed]

If you're not aware of this specific Cleveland engine forum, you really should check it out. :)

http://www.network54.com/Forum/119419/


cheers
Ed N.

[grand_marquis_gt]

Thanks guys.

I can always count on this place :D

[funcars]

The site you were referred to is great. Lots of good info there. You might also consider ordering a cam from MME. He knows Clevelands and makes very good power - they are also very sensitive to cam selection. Another option would be Dave Storlien at porting dynamics. The right cam is probably worth at least 50 hp over a decent one.

Good luck