1970 camro project

[helmet10]

Hello all. My name is Ernie and I'm currently working on a 1970 camaro. Its a base model no special anything. Have a 5.3 truck engine DBW and tranny on its way. Goodmark panels all four corners and tail. Just did some POR-15 inside Qtrs. pics attached will update every so often. I'm working at a body shop on my weekends off, have original fenders that need some dolly work. If they turn out well I may sell them. Helmet10

[David Sloan]

Hi Ernie
Welcome to the site!!! That looks like the kind of car we always get to start a project with!!!
Good luck!! Let us know if we can help? (w/ questions or were to find parts)
Keep us updated on the progress we like car porn!! LOL!!!

[helmet10]

I need to shrink pics but here is a quater pic both are on roughly. Need to align doors and fenders and weld up.

[helmet10]

All welded up. Will Post more.

[Mr.VENGEANCE]

getting there!

[helmet10]

I have a Ramjet coming. This is a 5.3L and 4l60 inside.
Not sure what engine I want yet. 2nd pic are Ebay plates and factory Mounts, engine sits too high. I have BRP mounts that drop low and place it further back...no pics though. Selling BRP Mounts and Tranny Crossmember with rubber tranny mount if anyone interested. Think I'm leaning toward Ramjet do to easier faster, setup...ie drop in.

[70Z]

Ramjet would be a lot easier.

Is that a gas water heater in the corner?

[helmet10]

That's my Titan III Nuclear ICBM, runs on 240v AC and heats water good too. My wife uses it for Bubble Bathes. This engine is giving me a headache, I have little patience.

[camaro608]

it must be a project because camaro in the title is spelled wrong
CAMRO lol
good luck