PDA

View Full Version : 6.0 lsx into 1970 mustang



1bad70mustang+camaro
03-25-2006, 09:59 PM
what will i run into?it will be running a carb and 200-4r trans.any suggestions?has anyone put a lsx into older mustang?headers?i have a good mach1 body and i want a 6.0 escalade motor in it.i have everything ready to go and will document progress.

69Myway
03-26-2006, 02:27 AM
I am going to make a wild guess that your first real challenge will be getting an oil pan to work with the Ford cross member and steering.

fast Ed
03-26-2006, 02:24 PM
You'll run into a lot of Ford nuts who will want to kick you in the stones for doing such a swap to a fastback Mustang. :rolleyes:

But hey, it's your car, you can do what you want with it, right?


cheers
Ed N.

rocketman
03-26-2006, 04:01 PM
why not a 4.6 or 5.4 ford,will be alot easier,because one i am sure there been alot of people who have done it.

twoduners11
03-27-2006, 09:04 PM
wow, a brother in arms! currently doing a sbc in a 69 fastback. first thing i did was get rid of everything i hate about the cars (firewall forward) at that point you will be amazed at how much room ya have in there. anyway i didnt really answer your question. i just wanted to give encouragement
mark

1bad69+70camaro
08-18-2007, 07:23 PM
Any body do this yet. info please!! Where is twoduners?

BLT2DRIVE
08-24-2007, 12:15 AM
The new Popular Hotrodding with the BITCHIN Blue Nova Pro-Tourer on the cover has an update on their Mustang with and LS 1, newer body style, but that's what the plasma cutter and welder are for. Just do it ...... They ran 10's with a stock take out on the juice!

Posi12Bolt
08-24-2007, 12:27 AM
why not a 4.6 or 5.4 ford,will be alot easier,because one i am sure there been alot of people who have done it.

because LSx > all :box2:

DarkoNova
08-24-2007, 05:27 PM
I'd like to know how you plan on supplying fuel to the carb as I still haven't found a way.

I mean I have, I'm just not sure how well it would work. :razz:

Matt

DCx
09-04-2007, 02:11 PM
throw one of these at it. im sure you could get all sorts of things to bolt up.

http://www.martzchassis.net/page3.htm