View Full Version : Spun metal donuts
jeff s
03-22-2006, 06:53 PM
Anyone know where I can get some?
I saw a source at the Hot Rod and Restoration Trade show last week, didn't pick up a card or literature, now I need some.
thanks,
Matt@RFR
03-22-2006, 07:07 PM
I have no idea what a spun metal donut is, unless you're talking about metal spinning, in which case only half a donut is possible at a time.
Nine Ball
03-22-2006, 07:17 PM
google:
http://www.covell.biz/donuts.htm
J2speedandcustom
03-22-2006, 07:19 PM
www.chassisshop.com
Steve Chryssos
03-22-2006, 07:23 PM
https://static1.pt-content.com/images/noimg.gif
Matt@RFR
03-22-2006, 07:24 PM
If that's what you're looking for, you can get them through www.chassisshop.com (http://www.chassisshop.com) too.
And for the record, there's nothing spun about those.
jeff s
03-23-2006, 07:18 AM
That's who's booth I saw them at, thanks a bunch!
I was told they spin each half of the donut from a flat, washer like disc, weld them around the OD then polish off the weld on the od.
The ones I saw at Indy had visible sanding marks around the OD.
thanks again
Jeff
J2speedandcustom
03-23-2006, 07:54 AM
Yep the inside seam is open and not welded. They come is real handy when building exhasut...
Powered by vBulletin®