PDA

View Full Version : 4" aluminum tubing & bends



Samckitt
03-06-2006, 04:08 PM
Anyone know the best place to get some 4" aluminum tubing & a couple of 45 degree or 90 degree bends? Or someplace that can mandrel bend a piece for a cold air intake?

Thanks,
Scot

Matt@RFR
03-06-2006, 04:42 PM
Burns and Ron Davis.

Damn True
03-06-2006, 10:05 PM
Many heavy vehicle (diesel truck, earth moving etc) repair facilities will have the material as well.

Blown353
03-06-2006, 10:24 PM
Woolf Aircraft is also a good source.

Bigblue73
03-08-2006, 11:40 AM
How about 4" stainless steel. 4" o.d. x .065 wall polished tubing. We use it for work for the food plants we service. Approximate costs are as follows:
90 degree Elbow - 4" - 105.00 ea.
45 degree Elbow - 4" - 80.00 ea.
4" Sanitary Tube - Polished ID/OD - 25.00 per foot.

All the stainless is the shelf stuff.

The Mandrel bending supplier we use is Tulsa Tube Bending (Tulsa, OK.) Great quality and they do the "proto-type" stuff for next to nothing. They can do it all.

Samckitt
03-08-2006, 01:05 PM
That is just a weeee bit more than I want to spend.

But thanks.
Scot

Dust87ss
03-08-2006, 01:40 PM
How 'bout these? (http://jagsthatrun.com/Pages/Parts_AirClean_Ducting.html)