View Full Version : Vell-ocity gets some new shoes
Well finally got the new wheels and tires installed!! It sits real nice!
nitrovette
02-25-2006, 12:09 PM
Very very nice :headbang:
NvrDun71
02-25-2006, 12:19 PM
Wow !!!!!!!!!:twothumbs What are the specs?
protour_chevelle
02-25-2006, 12:35 PM
Looks sexy.
-Matt
18x8 up front and 18x10 in the rear! :twothumbs
6'9"Witha69
02-25-2006, 02:50 PM
I really like the sidewall profile in the rear. Awesome combo. Congrats!
John McIntire
02-25-2006, 02:59 PM
Wow, looks good man!! I've been debating on 18's. What size tires are you running, and what suspension set up are you using?
John
ertoys
02-25-2006, 03:15 PM
Lookin good
dhardison
02-25-2006, 03:36 PM
WOW! Great stance! What are the wheel/tire specs?
1970cuda
02-25-2006, 03:43 PM
looks great but where's the other "S" on the fender
stealth71
02-25-2006, 04:34 PM
Can you give us more specs on the wheels and tires? Backspace? What is done to the suspension? Thanks I need to buy some wheels soon.
The wheels are Intro Pentia's and the tires are Nitto 555R drag radials. 305/45/18's on the rear and 245/45/18's on the front. The suspension is stock style from Air ride tech. I used there whole kit from front to back A arms and all. Real nice stuff!
srh3trinity
02-25-2006, 07:16 PM
Nice wheels and good stance, they tuck in the wells just right.
TUBED
02-25-2006, 08:30 PM
Looks great, what's the rear spacing on the wheels front and rear? Aside from the air ride and aftermarket disc brakes is the front and rear suspension the factory track width?
Gerald
The back spacing on the front is 4.75 and the rear is 5". The suspension is the factory width. I had to trim alittle off the quarter lip but that was yo fit that big drag radial. :)
Started putting together the fuel tank and pumps. This is real nice quality from Rick's!!:cool:
TUBED
02-26-2006, 09:30 PM
The back spacing on the front is 4.75 and the rear is 5". The suspension is the factory width. I had to trim alittle off the quarter lip but that was yo fit that big drag radial. :)
Tino, thanks for the response I appreciate the information. Nice ride and the tank looks great also.
Gerald
CAMAROBOY69
02-27-2006, 04:46 AM
Those wheels looks sick!! You nailed the stance too! :)
USAZR1
02-27-2006, 03:03 PM
The back spacing on the front is 4.75 and the rear is 5". The suspension is the factory width. I had to trim alittle off the quarter lip but that was to fit that big drag radial. :)
You just need more backspacing for those 10" rims,that's all. :)
Here's a few pics of the BB!!
dhardison
02-27-2006, 03:24 PM
Here's a few pics of the BB!!
Awesome!!! Is it a crate 572? 620hp or 720hp model?? Details on the induction please.
Dan
Awesome!!! Is it a crate 572? 620hp or 720hp model?? Details on the induction please.
Dan
Neither, Dart 572 big M block, Eagle crank and rods, JE custom pistons, AFR 335CNC heads with Comp solid roller cam, Isky red zone lifters. And comp shaft mount rockers. Induction is a Holley intake and fuel rails, Wilson elbow and Wilson 105mm T/B. Persision 96lb.injectors. Also not in picture are a pair of persision 67mm turbo's.:woot:
syborg tt
02-27-2006, 06:12 PM
awesome pics.
I quessed it was twin turbo by looking at the fuel tank and the TB Elbow. Man i can't wait to see more pics.
Here's a few pics of the turbo's fabed up. Now we can tear it apart and start coating the pipes. :twothumbs
syborg tt
05-29-2006, 06:31 PM
wow - that looks awesome
Well we got all the piping sent out for coating but I'm not sure what to do to the turbo housings. Any suggestions? Thanks for the input! :headbang:
WhiteNoma
06-06-2006, 05:25 PM
beautiful, any new updates?
796spdbu
06-06-2006, 07:07 PM
tino, what part of cincinnati are you from?You near 75/mitchell ave.I work in cinci.Id love to check out your car some time if it was col with you.Who did the engine.you know craig at cincy speed
Yea, I have been buying from Craig for years. I work at Pauls automotive engineering and that's where the engine was built. Shoot me a PM sometime and we can get together. :twothumbs
Powered by vBulletin®