View Full Version : NASCAR parts
i know this has probebly already been discussed but what are some links to some providers of nascar/circle track suspension parts? ive been doing alot of reading and im ploting to build a new front subframe from scratch as a side project
cjhutch
09-28-2004, 07:10 PM
Here's one Muscle Motorsports (http://www.musclemotorsports.com/). I have never ordered from them myself, so this is not an endorsement.
68LSS1
09-28-2004, 08:58 PM
I have made a few small orders through Stock Car Products (http://www.stockcarproducts.com/) and they shipped quickly and no problems with orders or stuff not being in stock. Seemed pretty knowledgable on stuff that turns left.
dennis68
09-28-2004, 09:07 PM
You mean stuff like this (http://www.jackazzmotorsports.com/frontsuspension.html)
Chevyman73
09-29-2004, 11:22 AM
Have you tried eBay? I got almost all of my suspension parts from sellers on eBay...and cheap too. I'll try and get some pics up tonight to see if we are talkin about the same stuff. :dunno:
Chevyman73
09-29-2004, 04:35 PM
Okay here we go. Sorry for the pallet, but I'm still laying concrete in the new part of the shop and didn't want them on the ground. Here is some of the stuff I'm going to attempt to use in my 73 Camaro. Wish me luck. :fingersx:
http://66.70.234.198/forum/attachment.php?attachmentid=840&stc=1
Shown from lower left clockwise is ..
SCP 1.25 diameter .312 thickness hollow sway bar with arms
Bronze bushings for front bar
Laughlin centerlink slotted for ackerman bushings
BHE billet tie rod sleeves and adjusters with Moog ends
SCP spindles with SCP steering arms slotted for ackerman bushings
SCP solid rear sway .85 inch with arms
Laughlin Upper control arms with billet cross shafts
Laughlin lower control arms with mono balls
Oh, I threw my Sweet p/s pump in there for good measure.
Total in this picture I have invested about $300 with shipping. :woot:
Now I gotta finish making it fit the car. :scared:
Powered by vBulletin®