Rack and Pinion problems?

[DJ Mabe]

I don't really know what the problem is to be honest. I have a POS Flaming River Rack kit in my 67 Mustang. When I turn the car into the corner everything is fine. When I come out of the corner the car still turns, the wheel doesn't come back to center. You have to turn the car back straight instead of it pulling back straight on its own. I know FR has had some problems but I'm not sure if this is one of them. Does this sound like I have something out of adjustment or what. Give me some ideas of what I can do to help with this.

[4MuscleMachines]

Sounds like a wheel alignment issue, have you properly aligned it yet?

[red67camaro]

I agree with 4MMM. This is probably an alignment issue.

Be sure of the alignment before going any further.

[DJ Mabe]

I am going to check it out. I had the car aligned but it was only a quick temporary alignment to get the car down the road. Thanks for they help guys.

[Marcus SC&C]

Agreed,sounds like you need more + caster and or less toe in. Mark SC&C

[jacobgiles]

sounds like you need more caster in it.