Steve Kurtzman's Garret's Rod Shop-Built 1972 Camaro on Forgeline Three Piece Wheels

[Forgeline Wheels]

"Slammer". Steve K's amazing 1972 Chevrolet Camaro was built by Garret's Rod Shop and was a Street Machine of the Year contender at the 2025 Goodguys Summit Racing Nationals, in Columbus, Ohio. It's powered by a Chevrolet Performance LT4 mated to a Bowler Performance Transmissions-prepped manual transmission and rides on Ridetech suspension, Wilwood disc brakes, 245/40R18 & 345/35R18 Mickey Thompson tires, and 18x8.5/18x12 Forgeline forged three piece AL307 wheels finished with Motorsport Gold centers & Polished outers! See more at: https://www.forgeline.com/customer-gallery-garrets-rod-shop/cgk2807
🇺🇸🇺🇸🇺🇸
https://static1.pt-content.com/images/pt/2026/02/OGSc0Zzh-1.jpg

https://static1.pt-content.com/images/pt/2026/02/oZrou0bh-1.jpg

https://static1.pt-content.com/images/pt/2026/02/jSPl2zDh-1.jpg

https://static1.pt-content.com/images/pt/2026/02/CX7nB21h-1.jpg

[Raszaron]

Very nice!

I have been going back and forth on what wheel I want to go with. I am currently using my old C5Z wheels (Flow One F4s) as temporary shop wheels 18x9.5 +54 with a 1.5" spacer on the front and 285/35R18 tires, and 18x10.5 +50 with a 1.5" spacer and a 10mm lug-centric spacer with 315/35R18 tires on the rear. Again, not driving on these as I am still building the car (Fool's GOLD - https://www.pro-touring.com/threads/142732-FooL-s-GOLD-1972-73-the-strike-Pontiac-Formula ), but need to roll around the shop and was used to check for clearance issues. I am looking at running a staggered set up of 18x10 on the front and 19x10.5 on the rear and interested in the GA3R Open Lug... I would think those would look really good on my 2nd Gen Firebird!

This 2nd Gen setup looks great on this Camaro though!