1968 Camaro RS, DSE, LS3, Supercharger, Forgeline

[classiccarcustoms]

1968 Camaro Rally Sport.
This project was started about 6 years ago. taken down to metal and front and rear suspension removed.
Sealed the underside and painted it with Raptor liner.
Gapped the car and painted it in pieces.
-Smooth firewall
-DSE mini tubs
-Subframe connectors
-DSE complete Hydroformed sub frame
-DSE Quadra link rear suspension
-Baer 6 piston front and rear brakes
-DSE Narrowed 9" rear end, tru trac.
-True LS3, 6.2L
-Trunnion bearing rocker up grade
-Concept 1 serpentine belt set up
-Lingenfelter G9 camshaft
-Whipple super charger
-T-56 6 speed manual transmission
-Rick stainless EFI fuel tank set up for mini tub camaro
-DSE RS electric headlights
-DSE low profile wiper set up
-Ididit tilt column
-Dakota Digital gauges
-American Auto wire harness
-Holley EFI fuel management
-Forgeline GA3C wheels, 18 front and 19 rear.
-LLC shop rear package tray
-LLC shop kick panels
-Ring Brother Billet hood hinges
-Marquez billet tail lights
-Clayton billet pedals
-Vintage heat and a/c
-Power windows

This build has about 2,000 trouble free miles.
Dyno tested.
Location Scotts Valley CA
Price $105,000

If you just add up parts alone, there is right at 100K in parts.

I need to clean out my pictures on this site, give me a minute to get some loaded.

To be 100% honest to bring this car to the next level would be custom interior and truck close out.

[classiccarcustoms]

I will get some better pictures this weekend.

[F pilot]

I will get some better pictures this weekend.


Honestly, I can’t believe that this isn’t sold. I was hankering for another pro touring car and was looking at the metal works car, a few on eBay, and getting one built from you. Turns out a SMOKIN deal turned up on a special edition modern pony car in the spec I wanted and the mods I wanted so I hit it. Otherwise, this would be in my garage.

damn ... good luck with the sale

[classiccarcustoms]

Thank you.
I took a deposit on this 68.
Please check back in 7 days. I might some more current builds coming up for sale212747212748212749

[jn66]

Which Metalworks car?

- - - Updated - - -

Stunning garage man...and beautiful builds (obviously).

Do you do custom orders at all? Or build what you like then sell them?

[classiccarcustoms]

Which Metalworks car?

- - - Updated - - -

Stunning garage man...and beautiful builds (obviously).

Do you do custom orders at all? Or build what you like then sell them?


Metal works car?

Thank you.

[JaySB]

Been a week so I figured I'd bump this thread. That car sell or any new builds available?

[classiccarcustoms]

Been a week so I figured I'd bump this thread. That car sell or any new builds available?
Both 69 Camaro in the last pictures are sold.
68 is available. It is back at the body shop to fix the ding in the drivers fender.

The 62 Impala and 56 bel Air could be available. Both are on Roadster Shop chassis.

[craulston]

Hello, I PM'd you on this.

[jeff-san]

1968 Camaro Rally Sport.
This project was started about 6 years ago. taken down to metal and front and rear suspension removed.
Sealed the underside and painted it with Raptor liner.
Gapped the car and painted it in pieces.
-Smooth firewall
-DSE mini tubs
-Subframe connectors
-DSE complete Hydroformed sub frame
-DSE Quadra link rear suspension
-Baer 6 piston front and rear brakes
-DSE Narrowed 9" rear end, tru trac.
-True LS3, 6.2L
-Trunnion bearing rocker up grade
-Concept 1 serpentine belt set up
-Lingenfelter G9 camshaft
-Whipple super charger
-T-56 6 speed manual transmission
-Rick stainless EFI fuel tank set up for mini tub camaro
-DSE RS electric headlights
-DSE low profile wiper set up
-Ididit tilt column
-Dakota Digital gauges
-American Auto wire harness
-Holley EFI fuel management
-Forgeline GA3C wheels, 18 front and 19 rear.
-LLC shop rear package tray
-LLC shop kick panels
-Ring Brother Billet hood hinges
-Marquez billet tail lights
-Clayton billet pedals
-Vintage heat and a/c
-Power windows

This build has about 2,000 trouble free miles.
Dyno tested.
Location Scotts Valley CA
Price $105,000

If you just add up parts alone, there is right at 100K in parts.

I need to clean out my pictures on this site, give me a minute to get some loaded.

To be 100% honest to bring this car to the next level would be custom interior and truck close out.

very clean build....

- what RWHP did the car lay down on the dyno?
- are there any undercarriage photos posted anywhere?
- any interior photos to share of the front, rear and trunk?
- rear gear ratio?
- anything other Gremlins to sort out?

you've built other Camaros, any other tire/wheel options to choose from?


thank you...Jeff

[hawg4fun]

if this is still FS please contact me 720-987-6864 thanksKB in Dallas

[classiccarcustoms]

The 68 is available. It is at the body shop right now getting the small dent and paint chip repaired. First come, first serve.
No Gremlins, over 1,000 trouble free miles. Dyno tuned and tested.

Sorry, no other wheel choices at this time. You can always take the Forgelines off and have the faces and barrels changed to any color or finish.
These wheels started off as polished lips with grey centers.