PDA

View Full Version : FS: Stainless Works 1 5/8" SBC headers - Jet Hot coated, 2nd Gen F Body



dipren443
03-04-2024, 07:59 AM
I have a set of Stainless Works 1 5/8" stainless headers I cannot use. I built a stouter engine and am upgrading to 1 3/4" headers. These have very few miles/run time in total and zero miles since receiving back from Jet Hot. They were mounted on the engine, but never fired. Jet hot coating is in a dark grey.


They have 3" V band collectors and stainless O2 bungs in both collectors. Invoice from Stainless Works is attached for proof of purchase (these predate SW putting their logo on the headers). I cannot find an electronic receipt for the Jet Hot work (2013 timeframe - return shipping attached), but I am sure I have it in my extensive amount of files for the car if need be. I will also include the V band adapters and V band clamps, I just need to dig these out of my storage unit. They are 3" stepped down to 2.5". They have some weld on them that can easily be cleaned off. I also don't mind cleaning up before shipment.


$1000 obo. I really need these gone as they are taking up space. I have a box for them already and can ship ASAP if needed.


I am in the Central Florida area not too far from UCF and local pickup is also welcome.


212534212535212536212537212538212539212533