C5 Corvette suspension adaptors

[Joris69velle]

Hey Guys.

Iv made 10 sets of steel adaptors to adapt the c5 front suspension and subframe to a custom frame(rail).
I was building a set for myself and then decided to make some more sets as i feel there might be some interest for these.
These could be easily welded to a 2x4” frame rail and would save much time on measuring and getting the allignment right.
Ive used the stock frame rails for the dimensions so everything lines up as it would in the Corvette

Made out of 3/16” thick tubing and laser cut plates.
Fully welded
Grade 8/ 10.9 metric hardware
30 1/2” between frame rails (when using 2x4” rails)

211183
211184
211185
211186
211187
211188

600$ usd shipped within the United States and Canada

Text or email me at 226-970-2453 or [email protected]

Thanks

Joris

[ryeguy2006a]

Very cool!! Any install pictures?

[dhutton]

Those are pretty nice. A lower cost alternative to the Dobbertin adapters I used on my 56 Cameo. I like that they use the stock shocks. Do you have rear adapters too?

Don

[Che70velle]

Well done sir. Very nice!

[Joris69velle]

Very cool!! Any install pictures?

Hey no havent had time to cut up my latest project car haha

[Joris69velle]

Those are pretty nice. A lower cost alternative to the Dobbertin adapters I used on my 56 Cameo. I like that they use the stock shocks. Do you have rear adapters too?

Don

Thanks.
Yes just wanted to keep them low cost and easy to incorporate.
No. Not yet at least.

[dhutton]

Thanks.
Yes just wanted to keep them low cost and easy to incorporate.
No. Not yet at least.
Keep us posted if you develop the rears. Thanks.

Here’s a Facebook group.
https://www.facebook.com/groups/436548567200056

[Joris69velle]

Keep us posted if you develop the rears. Thanks.

Here’s a Facebook group.
https://www.facebook.com/groups/436548567200056

Thanks for that link[emoji106]

[Joris69velle]

7 sets still available

[David Sloan]

How’s the alignment as far as specs? Same as the corvette or improved?
Looks good!

[Joris69velle]

How’s the alignment as far as specs? Same as the corvette or improved?
Looks good!

The allignment would be the same as the corvette. As the mounting points are in the exact location as the stock frame.

[TANKMASTERJ]

Hey Guys.

Iv made 10 sets of steel adaptors to adapt the c5 front suspension and subframe to a custom frame(rail).
I was building a set for myself and then decided to make some more sets as i feel there might be some interest for these.
These could be easily welded to a 2x4” frame rail and would save much time on measuring and getting the allignment right.
Ive used the stock frame rails for the dimensions so everything lines up as it would in the Corvette

Made out of 3/16” thick tubing and laser cut plates.
Fully welded
Grade 8/ 10.9 metric hardware
30 1/2” between frame rails (when using 2x4” rails)

211183
211184
211185
211186
211187
211188

600$ usd shipped within the United States and Canada

Text or email me at 226-970-2453 or [email protected]

Thanks

Joris
Joris
Your 30 1/2 frame rail measurements, is that outside rail to outside rail?
Looking at maybe doing this in my 74C10
Thanks jason

[Joris69velle]

Joris
Your 30 1/2 frame rail measurements, is that outside rail to outside rail?
Looking at maybe doing this in my 74C10
Thanks jason

Hey Jason

No that is on the inside of the 2x4 rails. So thats the space you have for your engine and headers setup.

[acegto]

Do not widebody the s10
Do not widebody the s10
Do not widebody the s10


You’re making this hard for me

[Joris69velle]

Hey Guys.
Ive have made adaptors for the rear as well now and they are available.
They are limited in quantity at this point.
I will upload some pictures soon.
Joris

[dhutton]

Hey Guys.
Ive have made adaptors for the rear as well now and they are available.
They are limited in quantity at this point.
I will upload some pictures soon.
Joris
Waiting for pics… :)

Don

[Joris69velle]

213708
213709
213710
Well here are some pics guys. Dont mind the messy shop theyre in now.
The last picture is of how they are tacked together ready to get shipped out

Joris

[Joris69velle]

Couple sets left

[Joris69velle]

Hey guys.

A few front sets left. Rears are sold out. When theyre gone theyre gone.

Joris

[raustinss]

unless you ask me to fab up some up lol